Can anyone tell me the proper torque specification for the 6 8mm x 1.25 bolts that secure the pressure plate to the flywheel?
As always, thanks for your help.
Jim
clutch pressure plate bolt torque?
Moderators: notoptoy, S Allen, Solex68
-
TucsonJim
- Roadster Fanatic
- Posts: 104
- Joined: Wed Oct 21, 2020 6:28 pm
- Location: Tucson, AZ
- Model: 1500/1600
- Year: Low Windshield-64-67.5
-
Bwk2000
- Roadsteraholic
- Posts: 982
- Joined: Mon Aug 23, 2021 3:09 pm
- Location: Halifax, Nova Scotia
- Model: 1500/1600
- Year: High Windshield-68-70
Re: clutch pressure plate bolt torque?
I believe the range is between 18.1 - 25.3 ft-lbs.
22 ft-lbs sounds like a nice round number
22 ft-lbs sounds like a nice round number
Kai
Halifax, N.S.
’69 SPL311 Sports 1600
Classic Cars - Because clean fingernails, free weekends, intact knuckles and financial stability are totally overrated.
Halifax, N.S.
’69 SPL311 Sports 1600
Classic Cars - Because clean fingernails, free weekends, intact knuckles and financial stability are totally overrated.
-
Solex68
- Site Supporter
- Posts: 2210
- Joined: Fri May 25, 2012 3:30 pm
- Location: Laguna Hills, CA
- Model: 2000
- Year: High Windshield-68-70
- Contact:
Re: clutch pressure plate bolt torque?
20 ft/lbs for an ASCO flywheel. 25 for a steel stock flywheel. Do not do 35 ft/lbs as it is listed somewhere.
Greg a.k.a SOLEX68 - http://www.datsunvents.com/
Laguna Hills, CA
68 2000
Always willing to help another Datsun Roadster owner
Pending installs: Stan Stealth Dizzy
Laguna Hills, CA
68 2000
Always willing to help another Datsun Roadster owner
Pending installs: Stan Stealth Dizzy