Well with anything, it seems, I broke something with trying to “fix†it. I’m hoping that someone can help me with this. I have tried a few times to fix it but it’s toast.
It’s is the switch pictured. Actually it’s the board that the wires are soldered to in the picture. It is the switch in the column of a 69.
Please help
Thanks
Matthew
I broke-ith a switch-ith
Moderators: notoptoy, S Allen, Solex68
-
Mattk
- Roadster Nut-Site Supporter
- Posts: 694
- Joined: Mon Oct 28, 2013 1:49 pm
- Location: DFW, TX
- Model: 2000
- Year: High Windshield-68-70
I broke-ith a switch-ith
You do not have the required permissions to view the files attached to this post.
MattK
-
SLOroadster
- Roadsteraholic
- Posts: 5361
- Joined: Sun Dec 08, 2002 2:53 am
- Location: Napa Ca
Re: I broke-ith a switch-ith
Been there, done that. I think I used JB Weld to glue the board back together. It wasn't pretty, but it worked.
Will
Will
Sorry, I find modern engine swaps revolting. Keep your G, R, or U series in your Roadster!
-
DAC21
- Roadster Fanatic-Site Supporter
- Posts: 1263
- Joined: Tue Sep 15, 2020 7:44 am
- Location: California
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: I broke-ith a switch-ith
I'd guess there are a couple traces on the back side of the board. Confirm there good, if not, you should be able to solder a jumper wire to re-establish the circuit. Maybe even just a dab of solder will do it. JB weld up the crack, or two part epoxy specifically for plastic. Good luck.
1967 1600 in waiting SPL311-09002 / R-28178
2018 Hyundai Elantra GT Sport Ultimate
2018 Hyundai Elantra GT Sport Ultimate
-
Mattk
- Roadster Nut-Site Supporter
- Posts: 694
- Joined: Mon Oct 28, 2013 1:49 pm
- Location: DFW, TX
- Model: 2000
- Year: High Windshield-68-70
Re: I broke-ith a switch-ith
Well thank you gentlemen! Busted out the JB Weld and glued it. Nope it’s not pretty but it is working. Getting the little ball back into place was a bitch but I got it after a few tries. Thank again.
MattK