Great question. It does not rub because of the alignment (-1.75 degrees camber) and overall tire diameter.redroadster68 wrote: Wed May 26, 2021 6:14 pm Alvin do you ever scrape tire on fender lip over compression bumps or hard cornering. Not a lot of clearance in pics . Thanks
Here is a picture from the Corkscrew at Laguna Seca under full compression while turning:
Pre-alignment it would rub on really hard left-hand turns under full compression. A good test (without causing too much damage) is a decent driveway entry...drive up/down at a severe angle and turn the wheel to see if it rubs the fender lip.
