Part number

[CSP311]

Hi,
I have tried downloading the parts info in the PMWIKI section to check, but my computer (work thing, only access) won't download anything. Could someone be so kind to check 25150-09400 (ignition switch) to see what model it goes on, or any other source. I have tried the online parts catalogue, but the part listed is for '69 model.

Thank you
Ian

[Lars]

Hi,

The ignition switch for the earlier roadsters are key numbers 001 and 002 at this page:
http://datsun311.partsmanual.net/311Par ... fault.aspx

The following part numbers are listed (in the order they were replaced, old to new):
25150-10600
25150-12200

25160-61500 (w/Ignition key)
B5160-61500 (w/Ignition key)

The number you have, 25150-09400, was initially made for the model 320 pick up. I took this number and ran it through this link:
http://www.trademotion.com/partlocator/ ... eid=214252

Low and behold, part number 25150-12200 is listed as a replacement for 25150-09400. The part should probably fit your car.

[CSP311]

Thanks Lars

[iloveredmeat]

Hi All, does anyone know if this ignition switch will work for a Datsun Roadster, and if so, what years it will work for?

A google search yields only that it will work for a Datsun 520 and a Datsun Patrol...

But then I found this older 311s post (see below), however it's an older post and the links are dead ends.

Wondering if I should keep it as a spare or put it up for sale.

Thank you for any info.
Peter

Hi,

The ignition switch for the earlier roadsters are key numbers 001 and 002 at this page:
http://datsun311.partsmanual.net/311Par ... fault.aspx

The following part numbers are listed (in the order they were replaced, old to new):
25150-10600
25150-12200

25160-61500 (w/Ignition key)
B5160-61500 (w/Ignition key)

The number you have, 25150-09400, was initially made for the model 320 pick up. I took this number and ran it through this link:
http://www.trademotion.com/partlocator/ ... eid=214252

Low and behold, part number 25150-12200 is listed as a replacement for 25150-09400. The part should probably fit your car.

Ignition-switch-1.jpg

Ignition-switch-2.jpg

Ignition-switch-3.jpg

Ignition-switch-4.jpg

[spl310]

Will work fine for early cars. I'm jealous of the keys

[Lars]

But then I found this older 311s post (see below), however it's an older post and the links are dead ends.

Updated link:
https://www.carpartsmanual.com/datsun/s ... itch-parts

[iloveredmeat]

Will work fine for early cars. I'm jealous of the keys

But then I found this older 311s post (see below), however it's an older post and the links are dead ends.

Updated link:
https://www.carpartsmanual.com/datsun/s ... itch-parts

Thanks gentlemen!

I've bookmarked that carpartsmanual, that looks invaluable.

And yes, the keys are awesome! I have my original key -- it's the big 'N' key, not the griffin, but it fits every original lock on the car including the gas cap... so I can't even think about swapping out.

Thanks again, I really appreciate it.
Peter