67.5 Shifter Cutout size

Tech tips and how to's

Moderators: notoptoy, S Allen, Solex68

User avatar
Curtis
Site Supporter
Posts: 4161
Joined: Fri Jan 01, 2010 2:49 pm
Location: Des Moines, WA
Model: 1500/1600
Year: Low Windshield-64-67.5

67.5 Shifter Cutout size

Post by Curtis »

Has anybody got a 67.5 they can shoot a photo of and give me the measurements for the opening in the tunnel? It has the big oval for either 4 speed or 5 speed. Putting a 5 speed in my 66.

Thanks.
66 stroker, almost done.
67 basket case, paint coming soon.
User avatar
Curtis
Site Supporter
Posts: 4161
Joined: Fri Jan 01, 2010 2:49 pm
Location: Des Moines, WA
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: 67.5 Shifter Cutout size

Post by Curtis »

Anyone?
66 stroker, almost done.
67 basket case, paint coming soon.
User avatar
pebbles
Roadster Fanatic-Site Supporter
Posts: 3925
Joined: Thu Dec 16, 2010 12:00 am
Location: Washington

Re: 67.5 Shifter Cutout size

Post by pebbles »

Install the 5sp shift plate and trace onto the tunnel. Ill go take a pic right now.
David




"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
User avatar
pebbles
Roadster Fanatic-Site Supporter
Posts: 3925
Joined: Thu Dec 16, 2010 12:00 am
Location: Washington

Re: 67.5 Shifter Cutout size

Post by pebbles »

If the heater is out.
.
DE0C648B-8753-4CE1-8D00-0CC1F328673E.jpeg

.
If the console is out.
.
91DB7982-2334-4BFF-A309-C9BD753A6F37.jpeg
You do not have the required permissions to view the files attached to this post.
David




"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
User avatar
Curtis
Site Supporter
Posts: 4161
Joined: Fri Jan 01, 2010 2:49 pm
Location: Des Moines, WA
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: 67.5 Shifter Cutout size

Post by Curtis »

Thanks, just the length of the hole only is what I need. Someone already butchered the hole for a 5 speed and I want to fix it.
66 stroker, almost done.
67 basket case, paint coming soon.
User avatar
spl310
Roadster Guru
Posts: 13237
Joined: Sun Dec 29, 2002 10:38 pm
Location: In front of this keyboard... in Jacksonville, Florida!

Re: 67.5 Shifter Cutout size

Post by spl310 »

Looks like 7"
"Wow, a Roadster!" Stuart Little

1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2006 Acura MDX
2013 Volkswagen Jetta TDI wagon
1995 F350 Powerstroke!
More...
User avatar
Curtis
Site Supporter
Posts: 4161
Joined: Fri Jan 01, 2010 2:49 pm
Location: Des Moines, WA
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: 67.5 Shifter Cutout size

Post by Curtis »

Does the cut out have a rolled edge and is it the same width full length?
66 stroker, almost done.
67 basket case, paint coming soon.
User avatar
spl310
Roadster Guru
Posts: 13237
Joined: Sun Dec 29, 2002 10:38 pm
Location: In front of this keyboard... in Jacksonville, Florida!

Re: 67.5 Shifter Cutout size

Post by spl310 »

i believe yes to both
"Wow, a Roadster!" Stuart Little

1967.5 2000
1967.5 2000
1964 1500
1964 1500
1967.5 1600
1968 chassis
2006 Acura MDX
2013 Volkswagen Jetta TDI wagon
1995 F350 Powerstroke!
More...
User avatar
Habitat.pat
Roadsteraholic
Posts: 644
Joined: Thu Jul 07, 2016 8:29 pm
Location: Central Texas
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: 67.5 Shifter Cutout size

Post by Habitat.pat »

I know this is an old thread but I was looking at the shifter hole yesterday. Mine 67.5 shifter hole looks to be factory, big enough for both shifter locations & has a rolled edge.

My question is what keeps water from getting up under the shifter plate? The shift boot is on the plate so it can’t seal the hole & besides, it is smaller than the body hole. I can’t imagine that there is nothing to keep water out. The parts manual doesn’t show anything either.

I thought the rubber shift boot was on the body & the vinyl boot on the shift plate.

I have a rubber boot that came from Dean that has holes that match the shift plate & an old NOS 32869 14802 rubber boot that fits also. Neither will close up the body hole & with the lip, the old boot won’t fit the body.

What am I missing?

Peace,
Pat
67.5 SPL311 Stroker Restomod
02 Silverado 1500 Tow vehicle
17 Camry current daily driver
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
User avatar
notoptoy
Vendor-Site Supporter
Posts: 9680
Joined: Fri Oct 02, 2009 2:55 pm
Location: Winston-Salem, NC and Ocala, FL
Contact:

Re: 67.5 Shifter Cutout size

Post by notoptoy »

Nothing missed I think, you are correct that there is only the rubber and vinyl "covers". I took an aftermarket shift boot that was bigger than the hole and installed it upside down from the hole to the shifter, then used the stock rubber and vinyl covers above that. The stock Rubber one is already breaking down, even with the additional protection.
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.

67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
User avatar
Habitat.pat
Roadsteraholic
Posts: 644
Joined: Thu Jul 07, 2016 8:29 pm
Location: Central Texas
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: 67.5 Shifter Cutout size

Post by Habitat.pat »

That seems odd. Is your body hole the size of the boot or is it long enough to clear both shifter locations?
67.5 SPL311 Stroker Restomod
02 Silverado 1500 Tow vehicle
17 Camry current daily driver
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
User avatar
notoptoy
Vendor-Site Supporter
Posts: 9680
Joined: Fri Oct 02, 2009 2:55 pm
Location: Winston-Salem, NC and Ocala, FL
Contact:

Re: 67.5 Shifter Cutout size

Post by notoptoy »

Good point! I have a 67.5 1600, in which I have upgraded to a 5- speed. Therefore I had to cut the hole larger to accommodate. So that is why I needed/wanted additional coverage.
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.

67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
User avatar
Habitat.pat
Roadsteraholic
Posts: 644
Joined: Thu Jul 07, 2016 8:29 pm
Location: Central Texas
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: 67.5 Shifter Cutout size

Post by Habitat.pat »

Yea, I’m adding a 5 speed to my 67.5. I don’t have to cut the hole, it came oversized from the factory. I’m trying to figure out how to keep the carpet dry.
67.5 SPL311 Stroker Restomod
02 Silverado 1500 Tow vehicle
17 Camry current daily driver
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
User avatar
Curtis
Site Supporter
Posts: 4161
Joined: Fri Jan 01, 2010 2:49 pm
Location: Des Moines, WA
Model: 1500/1600
Year: Low Windshield-64-67.5

Re: 67.5 Shifter Cutout size

Post by Curtis »

As far as I know 67.5 should all have the hole to accommodate 4 and 5 speed.
66 stroker, almost done.
67 basket case, paint coming soon.
User avatar
notoptoy
Vendor-Site Supporter
Posts: 9680
Joined: Fri Oct 02, 2009 2:55 pm
Location: Winston-Salem, NC and Ocala, FL
Contact:

Re: 67.5 Shifter Cutout size

Post by notoptoy »

Curtis:
You are correct, I am confusing the work I did with Chris on his car when we swapped transmissions. We did have to cut his tunnel and ended up with the bigger hole. On my 67.5 I did add the extra boot to keep the oil off the backside of the stock shifter boot. I think I posted photos here somewhere!
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.

67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
Post Reply