There are only two Renu locations in Cali the other being in Stockton per the Corp website. Possibly others offer a similar service just not under the 'Gas Tank Renu" system/ licensing. I did mention it was an 11 gallon tank.Linda wrote: Mon Oct 19, 2020 10:04 pm 800 seems out of line for the Renu process. I did go to that Bellflower location when I had that process done for my tank, but it was not that pricey.
I think I would call another location just to see their cost quote, maybe give them the tank measurements.
Otherwise a boil out then a DIY tank seal might work.
Linda
Fuel tank exterior galvanizing repair
Moderators: notoptoy, S Allen, Solex68
-
- Roadster Fanatic-Site Supporter
- Posts: 1264
- Joined: Tue Sep 15, 2020 7:44 am
- Location: California
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Fuel tank exterior galvanizing repair
1967 1600 in waiting SPL311-09002 / R-28178
2018 Hyundai Elantra GT Sport Ultimate
2018 Hyundai Elantra GT Sport Ultimate
- bmccarthy67
- Roadster Fanatic-Site Supporter
- Posts: 401
- Joined: Thu Feb 05, 2004 11:38 pm
- Location: Savannah, GA
Re: Fuel tank exterior galvanizing repair
I just had my tank done with the GTRenue process. It was $500 out the door. I'm guessing each individual location can charge as they see fit within reason (mine was at Chatham Radiator...an authorized Renu location..the only one on their web site for Georgia). There is, as others said a lifetime guarantee (hell they imbed a serial number plate in the coating to match your warranty card). I can say I was not happy with the work. The National site makes it look pretty cool with a pretty shiny gloss black look, but my outside is a pretty messy looking with a brushed on appearance and there were some real messy areas on the fill connector (which need to be a lot smoother for the fill hose to slide on. I imagine if you're worried about the galvanizing and you need to do something...this stuff is not going anywhere as it looks like a pretty thick coating that will protect the tank long after I'm gone.
v/r
Buddy
v/r
Buddy
http://www.mydatsun.com" onclick="window.open(this.href);return false;
67.5 SRL311-00321
67.5 SPL 2000 Transplant
66 SCCA Project
67.5 SRL311-00321
67.5 SPL 2000 Transplant
66 SCCA Project
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Fuel tank exterior galvanizing repair
My tank has a dull almost rubberized, coating on the outside which I think is very protective so I don’t mind.
Looks like my tank was done about April 2005, and still holding up.
Seems they make the point on the website that the process is for restoring OEM tanks, as it may be cheaper to buy an aftermarket tank for most cars that are not classics.
Linda
Looks like my tank was done about April 2005, and still holding up.
Seems they make the point on the website that the process is for restoring OEM tanks, as it may be cheaper to buy an aftermarket tank for most cars that are not classics.
Linda
Last edited by Linda on Tue Oct 20, 2020 9:59 pm, edited 2 times in total.
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
- DivinDave
- Roadster Fanatic
- Posts: 109
- Joined: Mon Aug 20, 2012 9:12 pm
- Location: Fairfax, VA / Frisco, NC
- Contact:
Re: Fuel tank exterior galvanizing repair
I took a tank to the local gas tank renu outlet in nearby area of MD back in 2014. It was $400, but really perfect inside and out.
Went to take another roadster tank to them and they have gone away due to changes in the area they were located. The process is not dirt cheap but it is really done right.
Went to take another roadster tank to them and they have gone away due to changes in the area they were located. The process is not dirt cheap but it is really done right.
Dave
'70 2L srl 13385. Not a beauty yet, but a great runner!
http://www.DiveHatteras.com" onclick="window.open(this.href);return false;
'70 2L srl 13385. Not a beauty yet, but a great runner!
http://www.DiveHatteras.com" onclick="window.open(this.href);return false;
- Habitat.pat
- Roadsteraholic
- Posts: 666
- Joined: Thu Jul 07, 2016 8:29 pm
- Location: Central Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Fuel tank exterior galvanizing repair
As a followup, I talked with the closest Renu company. They recommended just going with a high zinc content paint & be done with it. I sprayed a Rustolium brushable primer, then top coated with automotive black paint. I talked wot Tom Walter who used to be on this list (I think) and he said that this primer is certified for aviation use, I figured it was good enough for me!
Peace,
Pat
Peace,
Pat
67.5 SPL311 Stroker Restomod
02 Silverado 1500 Tow vehicle
17 Camry current daily driver
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
02 Silverado 1500 Tow vehicle
17 Camry current daily driver
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Fuel tank exterior galvanizing repair
The exterior is no big deal, you can paint it. It’s the interior that counts.
Would not be surprised if the patent is finished with Gas Tank Renu, therefor perhaps there are other vendors?
Linda
Would not be surprised if the patent is finished with Gas Tank Renu, therefor perhaps there are other vendors?
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
- bobd
- Roadster Nut-Site Supporter
- Posts: 456
- Joined: Mon Sep 01, 2008 12:46 pm
- Location: Lakeland, FL
- Model: 2000
- Year: High Windshield-68-70
Re: Fuel tank exterior galvanizing repair
'69 1600 with SR20DE
-
- Roadster Nut-Site Supporter
- Posts: 1737
- Joined: Fri Feb 13, 2015 8:08 pm
Re: Fuel tank exterior galvanizing repair
All primers are only as good as the prep under them, no matter the application.Habitat.pat wrote: Tue Dec 08, 2020 7:13 pm As a followup, I talked with the closest Renu company. They recommended just going with a high zinc content paint & be done with it. I sprayed a Rustolium brushable primer, then top coated with automotive black paint. I talked wot Tom Walter who used to be on this list (I think) and he said that this primer is certified for aviation use, I figured it was good enough for me!
Peace,
Pat
located in Chester NH
1967 1600 in restoration
2013 Arctic Cat F-1100 turbo
Ford F-350 6.0
Ford 9000 puller, Ford 960 puller, Ford 901show, Ford 971 worker, Oliver 70 waiting its turn
1967 1600 in restoration
2013 Arctic Cat F-1100 turbo
Ford F-350 6.0
Ford 9000 puller, Ford 960 puller, Ford 901show, Ford 971 worker, Oliver 70 waiting its turn
- Habitat.pat
- Roadsteraholic
- Posts: 666
- Joined: Thu Jul 07, 2016 8:29 pm
- Location: Central Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Fuel tank exterior galvanizing repair
Amen
67.5 SPL311 Stroker Restomod
02 Silverado 1500 Tow vehicle
17 Camry current daily driver
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
02 Silverado 1500 Tow vehicle
17 Camry current daily driver
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT