Does anyone know if part 13 is needed? I am not sure if I have it installed or not so wanted to have it ready if needed.
If there is a substitute part, or dimensions, that could work also that would be helpful
TIA
Linda
https://www.carpartsmanual.com/datsun/s ... /rear-axle
Axle spacer
Moderators: notoptoy, S Allen, Solex68
-
Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Axle spacer
You do not have the required permissions to view the files attached to this post.
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
-
Jimmers74
- Roadster Nut
- Posts: 47
- Joined: Sun Jul 07, 2019 8:00 pm
- Location: Austin, TX
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Axle spacer
After a failed rear wheel bearing, I pulled the axle (another funny story) and had a new bearing pressed on. No change in dimensions and had another 100,000 miles.
-
dynaguy
- Roadster Fanatic-Site Supporter
- Posts: 1250
- Joined: Wed Jan 01, 2003 3:27 pm
- Location: Colton, Wa
Re: Axle spacer
I have a spare one if you need it. Pat
-
Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Axle spacer
Very nice of you, Pat. I was wondering if you could measure the part, that way I and others can see if something can be obtained locally?
You do seem to always have a spare of everything....great
Linda
You do seem to always have a spare of everything....great
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
-
dynaguy
- Roadster Fanatic-Site Supporter
- Posts: 1250
- Joined: Wed Jan 01, 2003 3:27 pm
- Location: Colton, Wa
Re: Axle spacer
Here's some measurements for ya:
ID 1.22" or 31MM
OD 1.77" or 45MM
Thickness .096" or 2.75MM
Could check under machinery bushings with a local supplier. Or pm your address, I'll drop my spare in the mail for you.
Pat
ID 1.22" or 31MM
OD 1.77" or 45MM
Thickness .096" or 2.75MM
Could check under machinery bushings with a local supplier. Or pm your address, I'll drop my spare in the mail for you.
Pat
-
Habitat.pat
- Roadsteraholic
- Posts: 666
- Joined: Thu Jul 07, 2016 8:29 pm
- Location: Central Texas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Axle spacer
I just bought a couple of these from an on line dealer. He shipped them to me, no problem.
They are a little more than a flat spacer, there is a step on one face (don’t know if it is necessary) and the ID is radiused on one side to match the axle.
Peace,
Pat
They are a little more than a flat spacer, there is a step on one face (don’t know if it is necessary) and the ID is radiused on one side to match the axle.
Peace,
Pat
67.5 SPL311 Stroker Restomod
02 Silverado 1500 Tow vehicle
17 Camry current daily driver
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
02 Silverado 1500 Tow vehicle
17 Camry current daily driver
Pat Horne, Near Austin, TX
We support Habitat for Humanity
A hand UP, not a hand OUT
-
Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Axle spacer
Got a link, Pat.? Seems a little specialized so not sure how hard to find it is. Bet it is missing on a lot of Roadsters
Linda
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
-
s30james
- Forum Newb
- Posts: 1
- Joined: Sun Sep 24, 2017 8:29 am
Re: Axle spacer
I know this an old thread but I am missing one of these spacers and not having luck finding a replacement. I know it got lost when I brought the rear end to be powder coated. Anyone have luck finding a replacement?
-
DAC21
- Roadster Fanatic-Site Supporter
- Posts: 1263
- Joined: Tue Sep 15, 2020 7:44 am
- Location: California
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Axle spacer
I think you posted over on Facebook as well?s30james wrote: Thu Jan 06, 2022 1:46 pm I know this an old thread but I am missing one of these spacers and not having luck finding a replacement. I know it got lost when I brought the rear end to be powder coated. Anyone have luck finding a replacement?
This may be what you are looking for?? Although it appears there is both an inner and outer spacer so??
https://datsun-roadster-parts.com/product/dt-500/
1967 1600 in waiting SPL311-09002 / R-28178
2018 Hyundai Elantra GT Sport Ultimate
2018 Hyundai Elantra GT Sport Ultimate