Japanese cutie

augsburger · Post by **augsburger** » Thu Apr 30, 2020 2:06 pm

What's better than 1 JT exhaust ripping through a tunnel? 2 JT exhausts ripping through a tunnel.

secure pic.jpg

augsburger · Post by **augsburger** » Sun Jun 07, 2020 5:04 pm

I should have figured this one out, that my Frankenroadster with earlier fenders on the 70 frame would need different front TS lights. Now I know why the lights were such a botched PO job. JT sent me some NIB and now they work perfectly. Next comes the guages and Curtis harnesses. Went on a 100 mile test distance run Fri. and the car ran perfectly. Nothing but fun.

turn signal lights.jpg

ts lights before.jpg

redroadster · Post by **redroadster** » Wed Jan 27, 2021 2:01 pm

augsburger wrote: Sun Sep 29, 2019 5:05 pm And another of where the rod hit the inside of the header....
shredded piston.jpg

Just a reminder. This was a violent event that scared the s.%$ out of me... Think of the force required to go through the block and then crease a round tubular steel header the way it did... It was the nr. 2 crank journal. Look at how black and fried it is. Apparently a common prob with olde
r motors with unknown history (abuse).

What oil were you running ?

augsburger · Post by **augsburger** » Sun Mar 21, 2021 4:45 pm

I don't remember RR. I do remember that I was trying to clean up the oil with frequent changes though.

augsburger · Post by **augsburger** » Sun Mar 21, 2021 5:40 pm

Haven't posted for a while but here are some further pics of the saga:

image000000.jpg

image000001.jpg

augsburger · Post by **augsburger** » Sun Mar 21, 2021 6:07 pm

here's the original 665 yellow under the removed windshield/ And what a lovely dash it is...

original 665 yellow.jpg

Mattk · Post by **Mattk** » Thu Mar 25, 2021 7:20 pm

Really like this build! Hope yall made through the storm last night okay!

Cheers

augsburger · Post by **augsburger** » Sun Mar 28, 2021 5:58 pm

Paint4.jpg

back to 665 yellow...

augsburger · Post by **augsburger** » Sun Mar 28, 2021 6:08 pm

Roadster7.jpg

Roadster5.jpg

So....jack holes filled. Twisted bumpers straightened, bumperettes removed and holes filled, rechromed. New posties and twisties. Made a temp grille from billet with a floating 2000 emblem. (for now). Added an air dam and haven't involuntarily removed it yet. Added the tears and dots. Made the tail lights a 3 stack. Badging and moulding being finished but I'm just enjoying the clean look and pretty paint. Love the "strawing" of the JT exhaust that matches. The pictures truly do not do the paint justice.

Post by **notoptoy** » Sun Mar 28, 2021 9:14 pm

Looking good!

Mattk · Post by **Mattk** » Mon Mar 29, 2021 1:39 pm

Very nice!

gbraydon · Post by **gbraydon** » Fri Jun 11, 2021 1:33 am

The paint looks really nice. Any more updates?

Post by **S Allen** » Fri Jun 11, 2021 9:57 am

Looks great.

S

Gregs672000 · Post by **Gregs672000** » Fri Jun 11, 2021 12:14 pm

Congrats! Fun stuff!

Post by **CSP311** » Wed Jun 16, 2021 7:15 am

Does look swell in the 665 colour.

Datsun Roadster Forum-311s.org

Japanese cutie

Re: Japanese cutie

Re: Japanese cutie

Re: Japanese cutie

Re: Japanese cutie

Re: Japanese cutie

Re: Japanese cutie

Re: Japanese cutie

Re: Japanese cutie

Re: Japanese cutie

Re: Japanese cutie

Re: Japanese cutie

Re: Japanese cutie

Re: Japanese cutie

Re: Japanese cutie

Re: Japanese cutie