I need help refurbishing my tach (1970 2000). Any suggestions before I start taking it apart?
Thanks,
Pat
Tachometer Refurbishment- Disassembly Help
Moderators: notoptoy, S Allen, Solex68
-
PatS
- Site Supporter
- Posts: 29
- Joined: Sat Sep 16, 2017 11:09 am
-
mraitch
- Roadsteraholic
- Posts: 3629
- Joined: Mon Oct 02, 2006 7:03 pm
- Location: Lake Balboa (SFV) - CA
- Model: 1500/1600
- Year: High Windshield-68-70
- Contact:
Re: Tachometer Refurbishment- Disassembly Help
check with jon frampton - caraddict on 311
Peter Harrison
1970 1600 (Stroker) - TOAD SAN (Eliza)
1970 1600 (Stock) - As Yet Unnamed
Lake Balboa (SFV) , California
1970 1600 (Stroker) - TOAD SAN (Eliza)
1970 1600 (Stock) - As Yet Unnamed
Lake Balboa (SFV) , California
-
PatS
- Site Supporter
- Posts: 29
- Joined: Sat Sep 16, 2017 11:09 am
Re: Tachometer Refurbishment- Disassembly Help
Thanks. I'll reach out to Jon.
My tach doesn't read at idle but seems to work 'fine' above 1000 rpm. I'd like to disassemble so I can clean it up, repaint the orange/red color bands and also reseat the turn signal 'green' plastic pieces.
I am afraid to take the needle off so I can slide the internal mechanism out.
Pat
My tach doesn't read at idle but seems to work 'fine' above 1000 rpm. I'd like to disassemble so I can clean it up, repaint the orange/red color bands and also reseat the turn signal 'green' plastic pieces.
I am afraid to take the needle off so I can slide the internal mechanism out.
Pat