Welp, I got the new and significantly better fuel pump on, a sexy solid state one that's nice and quiet, mounted on the frame near the rear wheel well. So far it seems to be doing much better and is having no issues cutting out. I did notice a little sputtering a little this afternoon after letting the car idle for a bit, but it's like night and day so far.
I'll be posting another thread on some weird cooling issues I've uncovered along with this fueling issue.
Thanks everyone for the PM's and calls and input!
Mike
Vapor locking once again
Moderators: notoptoy, Solex68, S Allen
-
The Neck
- Roadster Fanatic
- Posts: 135
- Joined: Tue Oct 10, 2017 6:36 pm
- Location: Denver, CO
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Vapor locking once again
1968 CJ-5
2007 Audi S4
2003 Audi Allroad Stg 2
1967.5 1600
2007 Audi S4
2003 Audi Allroad Stg 2
1967.5 1600
-
redroadster
- Roadsteraholic
- Posts: 2624
- Joined: Tue Mar 12, 2013 10:58 am
- Location: KCMO
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Vapor locking once again
Does it the fuel pump , still run if you pull the coil wire out to kill the motor ?
Last edited by redroadster on Sun Apr 26, 2020 10:51 pm, edited 1 time in total.
Datsun dealer tech 76 to 87
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
-
The Neck
- Roadster Fanatic
- Posts: 135
- Joined: Tue Oct 10, 2017 6:36 pm
- Location: Denver, CO
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Vapor locking once again
Immediately diedredroadster wrote: Sun Apr 26, 2020 7:59 pm Does it still run if you pull the coil wire out to kill the motor ?
1968 CJ-5
2007 Audi S4
2003 Audi Allroad Stg 2
1967.5 1600
2007 Audi S4
2003 Audi Allroad Stg 2
1967.5 1600
-
Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Vapor locking once again
For educational purposes, what was the wrong pump, and what was the quiet new pump that was correct?
Linda
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
-
The Neck
- Roadster Fanatic
- Posts: 135
- Joined: Tue Oct 10, 2017 6:36 pm
- Location: Denver, CO
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Vapor locking once again
Great question Linda!!Linda wrote: Sun Apr 26, 2020 11:43 pm For educational purposes, what was the wrong pump, and what was the quiet new pump that was correct?
Linda
Pump was initially a generic from napa that was mounted in the inner fender well of my 1600. Did a terrible job of getting fuel to the carbs.
New quiet pump was a Facet posi-flo 2.5-4 psi from Napa. Pump was mounted near the rear wheel, and has been doing great after multiple drives with zero hiccups.
I believe the biggest issue here was the installation location.
Mike
1968 CJ-5
2007 Audi S4
2003 Audi Allroad Stg 2
1967.5 1600
2007 Audi S4
2003 Audi Allroad Stg 2
1967.5 1600