My steering wheel is looking pretty ugly, and in need of restoration. Restoration seems to be a bit pricey on these, and I have a few questions that'd greatly help in the process.
1) Are NOS steering wheels unobtanium, and if they aren't what do they typically cost?
2) Are the spokes supposed to be chrome or black? I honestly can't tell on mine
3) Has anyone used Steering Wheel Bob (NJ) or Gary's Steering Wheel Restoration (PA) services?
Thanks!
Steering wheel restoration
Moderators: notoptoy, S Allen, Solex68
-
- Roadster Nut
- Posts: 66
- Joined: Thu Sep 05, 2019 7:37 pm
- Location: PA
- Model: 2000
- Year: High Windshield-68-70
- Gregs672000
- Roadster Fanatic-Site Supporter
- Posts: 9003
- Joined: Fri Aug 07, 2009 11:47 pm
- Location: Tacoma, WA
Re: Steering wheel restoration
I have not heard of any NOS wheels available, but you could go to the vendors page and contact those great Folks! They'll know what's out there and what it might cost. Also, do a search on this site for steering wheel as a subject or key word and you'll find several posts of what folks have done over the years. The tech wiki may also give wheel adaptor part numbers etc. There lots of pics to check out too!
Greg Burrows
'67 2000 #588
Tacoma, WA
'67 2000 #588
Tacoma, WA
- MattC
- Roadster Fanatic
- Posts: 359
- Joined: Thu Mar 09, 2017 11:41 am
- Location: Williamsville, NY
Re: Steering wheel restoration
I’m in the middle of refinishing my steering wheel as we speak. I believe the spokes should be unpainted but I’m going to try mine black. I can always go back pretty easily. The center hub and spokes are semi-gloss. I filled in a few cracks and I’m about to paint the rim with Eastwood’s 2-part spray cans gloss chassis black and then covering with the same in gloss clear coat. Just waiting on some other bodywork on my pickup truck, the tailgate has some small dents and scratches and since it is also black, it seemed like a good time to paint both. Once you activate the 2-part spray, you have less than 48 hrs to use it.
You do not have the required permissions to view the files attached to this post.
Matt
1970 2000 #14204
2004 350Z Roadster
2014 Tundra
Williamsville, NY
1970 2000 #14204
2004 350Z Roadster
2014 Tundra
Williamsville, NY
- bakerjf
- Site Supporter
- Posts: 1384
- Joined: Wed Sep 07, 2011 5:48 pm
Re: Steering wheel restoration
I bought a NOS wheel from Japan last year. Spokes are supposed to be black. OBTW, horn pad trim ring is a painted pearlescent white, not clear or silver, or clear with silver painted on the backside...
Also, had “Steering Wheel Bob†restore another wheel about five years ago. He does amazing work, result is actually a little nicer than the NOS wheel, but he is not cheap. Expect a lowball estimate on the phone, with a jack on the price after you send it to him.
Also, had “Steering Wheel Bob†restore another wheel about five years ago. He does amazing work, result is actually a little nicer than the NOS wheel, but he is not cheap. Expect a lowball estimate on the phone, with a jack on the price after you send it to him.
J. Baker
Lafayette, CA
'69 2000 (Solex)
Lafayette, CA
'69 2000 (Solex)
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Steering wheel restoration
I think he just does that for lawyers....Expect a lowball estimate on the phone, with a jack on the price after you send it to him.
joke,joke,joke
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
- bakerjf
- Site Supporter
- Posts: 1384
- Joined: Wed Sep 07, 2011 5:48 pm
Re: Steering wheel restoration
Yeah, probably looked me up and gave me the special surcharge.
J. Baker
Lafayette, CA
'69 2000 (Solex)
Lafayette, CA
'69 2000 (Solex)
-
- Roadster Nut
- Posts: 66
- Joined: Thu Sep 05, 2019 7:37 pm
- Location: PA
- Model: 2000
- Year: High Windshield-68-70
Re: Steering wheel restoration
I spoke with Steering Wheel Bob and will see how much he wants for the work after his inspection. Fortunately, he's relatively close by. He told me about a Rolls Royce wheel he has on the bench, and given J Baker's experience I was sure to reinforce that the Roadster, while beloved, is no where in the same realm and hope to see the work priced accordingly .
Related, but slightly off-topic, he said he'd be able to address the shifter knob, but I'm concerned about the chrome plated part. Mine definitely needs replated. Bob said that often the plastic was molded directly on top of the chrome finish metal on shift knobs. Is that the case with ours, or can the chrome base be safely removed from the black plastic, and if so, how? If it can't, can it be rechromed as one piece without damaging the plastic? Searched but did not find. Thanks all!
Related, but slightly off-topic, he said he'd be able to address the shifter knob, but I'm concerned about the chrome plated part. Mine definitely needs replated. Bob said that often the plastic was molded directly on top of the chrome finish metal on shift knobs. Is that the case with ours, or can the chrome base be safely removed from the black plastic, and if so, how? If it can't, can it be rechromed as one piece without damaging the plastic? Searched but did not find. Thanks all!