Not Much Wheel Selection

ahgrafx · Post by **ahgrafx** » Thu Sep 19, 2019 9:42 am

Alvin wrote: Wed Sep 18, 2019 11:41 pm
ahgrafx wrote: Wed Sep 18, 2019 5:53 pm

What size do u think those are
These are 14x6 +12 offset
195/60/14 tires

I like the tires size and fitment, now i just need the filled in look. Lil scared of having to "make" things work. Gap between front fender and tire could be closed up a bit, maybe a 15" would do that?

Pjackb · Post by **Pjackb** » Thu Sep 19, 2019 10:49 am

ahgrafx wrote: Thu Sep 19, 2019 9:42 am
I like the tires size and fitment, now i just need the filled in look. Lil scared of having to "make" things work. Gap between front fender and tire could be closed up a bit, maybe a 15" would do that?

Ahgrax,
There are more variables at play then just wheel size , tire size, wheel offset , suspension setup etc all play a role
you can have 14â€ wheel and tire combo which fills the gap better then 16â€

Based on your comments and perceived knowledge i would highly recommend you spend some time looking at Alvinâ€™s wheel and tires post and take note of the specs of wheel, tire ,springs combo that you like and look for wheels with the same specs

viewtopic.php?f=34&t=5787

Make sure you look at late cars since yours is a 67.5

Good luck

RCMike · Post by **RCMike** » Thu Sep 19, 2019 11:21 am

Brent lives here in SoCal..lol

And yes, that is his car.

pebbles · Post by **pebbles** » Thu Sep 19, 2019 5:58 pm

ahgrafx wrote: Thu Sep 19, 2019 9:42 am I like the tires size and fitment, now i just need the filled in look. Lil scared of having to "make" things work. Gap between front fender and tire could be closed up a bit, maybe a 15" would do that?

Wider wheels (negative offset) actually raise the car, if your springs are still in good shape.
Stancing will require spring work. Shave .200â€ off of both ends of the spring. And .400 off of the bumpstop. Done.

ahgrafx · Post by **ahgrafx** » Sat Sep 21, 2019 1:13 pm

Thanks pebbles and pj

LBLanni · Post by **LBLanni** » Fri Nov 22, 2019 10:03 am

Does anyone know if 15x8 with 0 offset wheels will fit on a 1969 Roadster?

redroadster · Post by **redroadster** » Fri Nov 22, 2019 1:59 pm

Where is a 15x 8 with 4 lug pattern?
My 14 x6 with 70s 185 barely work
280 zx had 15" 4 lug but not a hole big enough for the frt. hub on 311

nismou20 · Post by **nismou20** » Fri Nov 22, 2019 5:51 pm

Itâ€™s hard finding 4 bolt on114.3 pattern these days. Plenty 5 bolts though.

Alvin · Post by **Alvin** » Fri Nov 22, 2019 11:28 pm

LBLanni wrote: Fri Nov 22, 2019 10:03 am Does anyone know if 15x8 with 0 offset wheels will fit on a 1969 Roadster?

Short answer is no.
With some creativity anything is possible though!
Here is a 15x8 running a 225/50/15 tire:

Post by **2mAn** » Sat Nov 23, 2019 12:54 am

Kyushashoes.com

ahgrafx · Post by **ahgrafx** » Sat Sep 19, 2020 5:13 pm

Does anyone know what wheels these are in the front?

Post by **spl310** » Sun Sep 20, 2020 7:17 pm

Look like Mazda RX7

rwmann · Post by **rwmann** » Mon Sep 21, 2020 5:38 am

14x7, +15, 205/50R14

JT68 · Post by **JT68** » Mon Sep 21, 2020 8:14 am

theunz wrote: Mon Sep 16, 2019 11:22 am The Pontiac Aztec was different too.

My favorite quote from this thread.

Man there are some fugly wheels on these pages....

Post by **spl310** » Mon Sep 21, 2020 8:53 am

ahgrafx wrote: Sat Sep 19, 2020 5:13 pm Does anyone know what wheels these are in the front?

I believe that I was correct above:

https://www.stockwheels.com/mazda-rx7-1 ... -wheel-rim?

Datsun Roadster Forum-311s.org

Not Much Wheel Selection

Re: Not Much Wheel Selection

Re: Not Much Wheel Selection

Re: Not Much Wheel Selection

Re: Not Much Wheel Selection

Re: Not Much Wheel Selection

Re: Not Much Wheel Selection

Re: Not Much Wheel Selection

Re: Not Much Wheel Selection

Re: Not Much Wheel Selection

Re: Not Much Wheel Selection

Re: Not Much Wheel Selection

Re: Not Much Wheel Selection

Re: Not Much Wheel Selection

Re: Not Much Wheel Selection

Re: Not Much Wheel Selection