Low windshield post rubber

Post by **SABLT194** » Thu Jun 06, 2019 12:37 am

My rubber pieces wont stay attached to the vertical post on my 66. Is there something I am missing on how these are supposed to be attached? I just have them clipped on into the small channel.

Regards,
Steve

Nissanman · Post by **Nissanman** » Thu Jun 06, 2019 1:57 am

Those fellas [36] are supposed to be bonded to the stainless trim [17,18 & 12,13] which is riveted to the end of the windshield frame: -

Post by **SABLT194** » Thu Jun 06, 2019 4:55 am

AHHHHHHHH! That's the only thing that makes any sense. I had removed the rivets and channels to have my posts re chromed years ago and cleaned up the stainless so I lost that little piece of information.

Thanks so much. Weatherstrip glue it is then.

Regards,
Steve

Post by **C.Costine** » Sat Jun 08, 2019 3:30 pm

Nissanman wrote: Thu Jun 06, 2019 1:57 am Those fellas [36] are supposed to be bonded to the stainless trim [17,18 & 12,13] which is riveted to the end of the windshield frame: -

What is best to use to "bond" them? Last time I used contact cement but I wasn't happy with that. I recently picked up a tube of 3M Super Black Weatherstrip adhesive.

Post by **SABLT194** » Sat Jun 08, 2019 4:10 pm

That's what I was fix'n to use

Regards,
Steve

devo · Post by **devo** » Sat Jun 08, 2019 6:44 pm

I used the 3M Super Black on mine over 2 years ago. No problems.

Nissanman · Post by **Nissanman** » Sat Jun 08, 2019 7:30 pm

For a lot of the rubber I used a Polyurethane adhesive/sealant.
A bit pricey but sticks like baby do do's to a blanket.

Datsun Roadster Forum-311s.org

Low windshield post rubber

Low windshield post rubber

Re: Low windshield post rubber

Re: Low windshield post rubber

Re: Low windshield post rubber

Re: Low windshield post rubber

Re: Low windshield post rubber

Re: Low windshield post rubber