The Quick/Small/(Stupid?) Question Thread-take 2

Ralph · Post by **Ralph** » Sat Apr 13, 2019 4:31 pm

I have a set of Nissan aluminum wheels that came with the car ... Nissan part number 40300P7100. Will they fit? my '68?

theunz · Post by **theunz** » Sat Apr 13, 2019 10:10 pm

tjp wrote: Sat Apr 13, 2019 3:24 pm What does a five speed transmission weigh?

Don't hold me to this, as my memory is none too good. That questions was asked a few years ago, and I weighed mine at the time at I believe 85lbs. If it's critically important you could search through my posts.

car_cursed · Post by **car_cursed** » Tue Apr 16, 2019 12:12 pm

replacing my differential cover gasket this weekend, can anyone tell me the correct torque settings for the bolts?

dynaguy · Post by **dynaguy** » Wed Apr 17, 2019 7:47 am

viewtopic.php?f=3&t=31670

car_cursed · Post by **car_cursed** » Wed Apr 17, 2019 9:55 am

I saw that and that, but a differential flange is not the same as the cover.

Lorna c · Post by **Lorna c** » Fri Apr 19, 2019 12:34 pm

how many licks does it take to reach the tootsie roll center of a tootsie pop ?

Lorna c · Post by **Lorna c** » Fri Apr 19, 2019 12:35 pm

sorry feeling sparky today

Post by **C.Costine** » Fri Apr 19, 2019 4:49 pm

Lorna c wrote: Fri Apr 19, 2019 12:34 pm how many licks does it take to reach the tootsie roll center of a tootsie pop ?

It takes me about five........Then I bite it!

sdb8100 · Post by **sdb8100** » Sat Apr 20, 2019 1:55 pm

What is the torque specs for the nut on the bottom of 1) the steering gear box 2) the idler box??

Iâ€™ve found it called out in the past but I cannot find it!

Thanks

Lorna c · Post by **Lorna c** » Sat Apr 20, 2019 2:15 pm

C.Costine wrote: Fri Apr 19, 2019 4:49 pm
Lorna c wrote: Fri Apr 19, 2019 12:34 pm how many licks does it take to reach the tootsie roll center of a tootsie pop ?

It takes me about five........Then I bite it!

hahaha. nope 3 is the correct answer . one , two , three , at least that's what the owl says

pebbles · Post by **pebbles** » Sat Apr 20, 2019 2:30 pm

car_cursed wrote: Tue Apr 16, 2019 12:12 pm replacing my differential cover gasket this weekend, can anyone tell me the correct torque settings for the bolts?

Per the 2L wiki 12-18 ft lbs
http://www.311s.org/pmwiki-311/pmwiki.p ... ueSettings

pebbles · Post by **pebbles** » Sat Apr 20, 2019 2:32 pm

sdb8100 wrote: Sat Apr 20, 2019 1:55 pm What is the torque specs for the nut on the bottom of 1) the steering gear box 2) the idler box??

Iâ€™ve found it called out in the past but I cannot find it!

Thanks

Per the 2L wiki
Idler 65-79 ft lbs
Steering box 101 ft lbs
http://www.311s.org/pmwiki-311/pmwiki.p ... ueSettings

sdb8100 · Post by **sdb8100** » Sat Apr 20, 2019 7:45 pm

Thanks!

Post by **2mAn** » Tue Apr 23, 2019 11:32 am

where is the part number on the LSDs?

Post by **2mAn** » Wed Apr 24, 2019 12:31 pm

2mAn wrote: Tue Apr 23, 2019 11:32 am where is the part number on the LSDs?

25th hour bump

Datsun Roadster Forum-311s.org

The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2

Re: The Quick/Small/(Stupid?) Question Thread-take 2