Won't start
Moderators: notoptoy, S Allen, Solex68
-
- Forum Newb
- Posts: 3
- Joined: Tue Feb 19, 2019 7:10 pm
- Location: Victoria, B.C. Canada
- Model: 2000
- Year: High Windshield-68-70
Won't start
New to forum, 68 solex roadster, i completed full frame off restoration about 4 years ago. Have owned car for over 36 years, numbers matching car. Have been sidelined with other projects, just getting back to finishing off small details. Had driven car couple years, maybe 100 miles, car ran great, no issues.
When I did the restoration the dash was out, went thru entire electrical loom, tested all the gauges, rebuilt the starter, it is a brand new car.
This spring I put in a new fully charged battery, have power to lights, heater fan motor etc, when I turn the key absolutely nothing.
Any help would be appreciated
When I did the restoration the dash was out, went thru entire electrical loom, tested all the gauges, rebuilt the starter, it is a brand new car.
This spring I put in a new fully charged battery, have power to lights, heater fan motor etc, when I turn the key absolutely nothing.
Any help would be appreciated
- notoptoy
- Vendor-Site Supporter
- Posts: 9677
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: Won't start
Welcome Brian!
When you have time, start a thread and post pictures of your ride!
I would start with a quick check on the back of the key - do you have power getting to the switch?
After that I would look at grounds, make sure after all that sitting that the grounds haven't become corroded.
When you have time, start a thread and post pictures of your ride!
I would start with a quick check on the back of the key - do you have power getting to the switch?
After that I would look at grounds, make sure after all that sitting that the grounds haven't become corroded.
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
- nismou20
- Roadsteraholic
- Posts: 1488
- Joined: Thu Jul 07, 2005 2:16 pm
- Location: Pasadena, Ca
Re: Won't start
Is the spade connector to starter making? Grounds?
2004 Chevy Tracker
2010 RAV4
1969 Datsun Roadster
2005 Lotus Elise
1995 Toyota Tercel (Poormans Corolla)
2001 Fleetwood Jamboree RV
2010 RAV4
1969 Datsun Roadster
2005 Lotus Elise
1995 Toyota Tercel (Poormans Corolla)
2001 Fleetwood Jamboree RV
- redroadster
- Roadsteraholic
- Posts: 2415
- Joined: Tue Mar 12, 2013 10:58 am
- Location: KCMO
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Won't start
Ive always had to tap on my starter when it sets for months ,with s long pry bar ,have someone hold it on crank , get it pumping oil to the top before firing up
Start it on 2 or 1 cly
BTW my 311 sets up in the pic because a brake was stuck pushing it out of the garage after setting for yrs , it sets normal now.
Start it on 2 or 1 cly
BTW my 311 sets up in the pic because a brake was stuck pushing it out of the garage after setting for yrs , it sets normal now.
Last edited by redroadster on Fri Apr 12, 2019 7:02 pm, edited 1 time in total.
Datsun dealer tech 76 to 87
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
-
- Roadster Nut-Site Supporter
- Posts: 1736
- Joined: Fri Feb 13, 2015 8:08 pm
Re: Won't start
On another forum that I visit frequently this is almost always caused by PERFECTLY CLEAN cable terminals.
located in Chester NH
1967 1600 in restoration
2013 Arctic Cat F-1100 turbo
Ford F-350 6.0
Ford 9000 puller, Ford 960 puller, Ford 901show, Ford 971 worker, Oliver 70 waiting its turn
1967 1600 in restoration
2013 Arctic Cat F-1100 turbo
Ford F-350 6.0
Ford 9000 puller, Ford 960 puller, Ford 901show, Ford 971 worker, Oliver 70 waiting its turn
-
- Forum Newb
- Posts: 3
- Joined: Tue Feb 19, 2019 7:10 pm
- Location: Victoria, B.C. Canada
- Model: 2000
- Year: High Windshield-68-70
Re: Won't start
Brand new terminals, will play with tomorrow, have 66 mustang, Datsun way more fun. Process of elimination
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: Won't start
check if anything fell off your coil
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Gregs672000
- Roadster Fanatic-Site Supporter
- Posts: 9012
- Joined: Fri Aug 07, 2009 11:47 pm
- Location: Tacoma, WA
Re: Won't start
Nothing meaning that it does not turn Over? Starter solenoid connection likely, lose or disconnected spade connector, or ignition switch issue...
Greg Burrows
'67 2000 #588
Tacoma, WA
'67 2000 #588
Tacoma, WA
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Won't start
Broken coil wire to distributor. I had several MSD spark plug wires break inside causing trouble
Or dead coil?
Linda
Or dead coil?
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
-
- Forum Newb
- Posts: 3
- Joined: Tue Feb 19, 2019 7:10 pm
- Location: Victoria, B.C. Canada
- Model: 2000
- Year: High Windshield-68-70
Re: Won't start
Removed ignition switch assembly today, put screwdriver in solenoid.... car runs fantastic! Looking for key/switch assembly.
Very happy!
Very happy!
- Solex68
- Site Supporter
- Posts: 2088
- Joined: Fri May 25, 2012 3:30 pm
- Location: Laguna Hills, CA
- Model: 2000
- Year: High Windshield-68-70
- Contact:
Re: Won't start
You either need a new ingestion switch (not the entire assembly) or your plug to it was partially out, or one of the wire to it came lose or out.
There are two types that I know of. You can ignore the red arrows as that was used for a different reason.
The two types I know of are the two on the left. The far left one seems easier to find.
__
Also note, once found you make need to grind down or off completely one of the metal fins.
There are two types that I know of. You can ignore the red arrows as that was used for a different reason.
The two types I know of are the two on the left. The far left one seems easier to find.
__
Also note, once found you make need to grind down or off completely one of the metal fins.
You do not have the required permissions to view the files attached to this post.
Greg a.k.a SOLEX68 - http://www.datsunvents.com/
Laguna Hills, CA
68 2000
Always willing to help another Datsun Roadster owner
Pending installs: All steering components, Stan Stealth Dizzy
Laguna Hills, CA
68 2000
Always willing to help another Datsun Roadster owner
Pending installs: All steering components, Stan Stealth Dizzy
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Won't start
One on the left is Standard US120 as posted in Wiki, I believe. 2nd is hard to find. Rallye documents different types
Linda
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
-
- Forum Newb
- Posts: 1
- Joined: Sun Feb 12, 2017 3:16 am
- Location: Eastern Pennsylvania
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Won't start
The switch from an 82 Nissan Stanza is the smaller switch. I just tried it in my 1970 1600 today and it fit. Part no Duralast ls517 from AutoZone. Rockauto is much cheaper. US120 was too big in my case. Terminals matched too so no rewiring needed.
487-10 from this page
http://datsunroadster.com/PIC_PAGES/PAR ... s_info.htm
487-10 from this page
http://datsunroadster.com/PIC_PAGES/PAR ... s_info.htm
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Won't start
The Duralast LS517 does not have the same slot engagement as the 487-08 from link. I would think it would not seat correctly?
Linda
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.