Engine storage recommendations
Moderators: notoptoy, S Allen, Solex68
-
- Roadster Fanatic
- Posts: 436
- Joined: Sat Nov 05, 2016 1:02 am
- Location: Daphne, Al
- Model: 2000
- Year: Low Windshield-64-67.5
Engine storage recommendations
I have a spare U20 engine that I want to store without damaging the pan or head. I have looked for a universal engine cradle that I could bolt the block to leaving it upright and off the pan with the ability to move it if needed. Has anyone found one that fits or made one that works? I see them for small block Chevys and Fords that claim to be universal but specify Chevy or Ford blocks. Thanks Rick
-
- Roadster Fanatic-Site Supporter
- Posts: 1790
- Joined: Sat Nov 21, 2009 11:37 pm
- Location: Vancouver, Washington
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Engine storage recommendations
Harbor Freight has an inexpensive engine stand.
Dan
Dan
SPL311 aka Skooter. Sold. Now wasting away in the SF area.
1990 Nissan 300zx. Sold this one too.
2018 VW Tiguan
1990 Nissan 300zx. Sold this one too.
2018 VW Tiguan
-
- Roadster Fanatic
- Posts: 436
- Joined: Sat Nov 05, 2016 1:02 am
- Location: Daphne, Al
- Model: 2000
- Year: Low Windshield-64-67.5
Re: Engine storage recommendations
I considered that but anengine stand takes up a lot of space vs a cradle or dolly. This will just be an insurance motor for a bad day with my car’s engine that I Hope never happens. Thanks Rick
- jrusso07
- Roadsteraholic
- Posts: 1724
- Joined: Sat Aug 02, 2008 9:02 am
- Location: Penn Yan, NY
- Model: 2000
- Year: High Windshield-68-70
Re: Engine storage recommendations
I use a Harber freight furniture dolly. It needs a wood 2x4 cross
Member for the front of the pan and the rear end of the block sits on the dolly. I have stored U20s and R16s on these for years, like over 10 for a R16 without any damage. You can roll it around if needed too. I also use these for transmissions.
That said, it’s not 100% stable and with a little effort you could push it over and off the dolly. But if you park it and leave it, no problems
Member for the front of the pan and the rear end of the block sits on the dolly. I have stored U20s and R16s on these for years, like over 10 for a R16 without any damage. You can roll it around if needed too. I also use these for transmissions.
That said, it’s not 100% stable and with a little effort you could push it over and off the dolly. But if you park it and leave it, no problems
Joe
1969 SRL311 - Solex
1970 SPL311 - U20 mod
1970 SRL311
1969 SRL311 - Solex
1970 SPL311 - U20 mod
1970 SRL311
- nismou20
- Roadsteraholic
- Posts: 1500
- Joined: Thu Jul 07, 2005 2:16 pm
- Location: Pasadena, Ca
Re: Engine storage recommendations
Brilliant!
2004 Chevy Tracker
2010 RAV4
1969 Datsun Roadster
2005 Lotus Elise
1995 Toyota Tercel (Poormans Corolla)
2001 Fleetwood Jamboree RV
2010 RAV4
1969 Datsun Roadster
2005 Lotus Elise
1995 Toyota Tercel (Poormans Corolla)
2001 Fleetwood Jamboree RV
- fj20spl311
- Roadsteraholic
- Posts: 5022
- Joined: Mon Nov 28, 2005 3:54 pm
- Location: San Diego, Ca
Re: Engine storage recommendations
You can always augment the furniture dolly with a 2x4 stand screwed to it. I just build a box that encompasses the oil pan and raise the engine so it sets on the flange of the oil pan. I screw that to the dolly and lower the engine into the box.
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
-
- Roadster Fanatic
- Posts: 436
- Joined: Sat Nov 05, 2016 1:02 am
- Location: Daphne, Al
- Model: 2000
- Year: Low Windshield-64-67.5
Re: Engine storage recommendations
Thanks guys I looked Those Foley’s at Harbor Freight and had thought they might work . I thought I might need to pull the head to lighten the load up a little and make it not so top heavy. With the head on the motor and with it so narrow compared to a v8 I thought about laying it down on a dolly on the the drivers side of the block thinking it would be more stable an less likely to flip over if bumped. I need to pull the flywheel off for sure as its pretty heavy by itself. For now have it on a car dolly with 2x4s lying on across the ends and I layer on on the driver side of the block. Thanks for your ideas I just wish someone would make a motor cradle for these blocks like the one’s on Ebay for Fords & Chevys. I would sure buy one. Thanks RickRick
- RCMike
- Roadsteraholic
- Posts: 2460
- Joined: Tue Mar 13, 2012 12:58 pm
- Location: Pomona, CA
Re: Engine storage recommendations
So, the harbor freight furniture dollys work great.
But if you want the engine to actually be a spare when you need it, you better maintain it while it is stored. Make sure it gets oiled and turned occasionally. This is significantly easier on a stand.
But if you want the engine to actually be a spare when you need it, you better maintain it while it is stored. Make sure it gets oiled and turned occasionally. This is significantly easier on a stand.
- bobd
- Roadster Nut-Site Supporter
- Posts: 456
- Joined: Mon Sep 01, 2008 12:46 pm
- Location: Lakeland, FL
- Model: 2000
- Year: High Windshield-68-70
Re: Engine storage recommendations
I've had a complete frame with engine, wheels and all running gear sitting on 4 HF dollies for several years now.
'69 1600 with SR20DE
-
- Roadster Enthusiast
- Posts: 69
- Joined: Mon Jan 11, 2016 6:05 pm
- Location: somewher between here and there
- Contact:
Re: Engine storage recommendations
If you use a furniture dolly, put a cheap ratchet strap around it and the engine. This makes it somewhat more stable.
sitting somewhere in the sands of time
- bossbob
- Site Supporter
- Posts: 460
- Joined: Thu Aug 24, 2017 3:44 pm
- Location: Central Coast
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Engine storage recommendations
You can store it between the fenders of my car.............
68 Roadster 1600
70 Boss 302
65 K-Code Fastback
69 Mach 1 393 Stroker 5 spd
63.5 Galaxy Conv. 427 Dual Carb, 4 spd
72 Ranchero
65 GT Coupe
70 Boss 302
65 K-Code Fastback
69 Mach 1 393 Stroker 5 spd
63.5 Galaxy Conv. 427 Dual Carb, 4 spd
72 Ranchero
65 GT Coupe
-
- Roadster Enthusiast
- Posts: 69
- Joined: Mon Jan 11, 2016 6:05 pm
- Location: somewher between here and there
- Contact:
- Jujuman
- Site Supporter
- Posts: 177
- Joined: Tue Sep 07, 2010 9:12 pm
- Location: Tampa Florida
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Engine storage recommendations
how would you recommend keeping surface rust off cylinders and cam lobes.
any oiling or random turn over?
overfill with oil in pan?
fill with straight antifreeze?
plug openings. ports?
any oiling or random turn over?
overfill with oil in pan?
fill with straight antifreeze?
plug openings. ports?
Jujuman
Red 67.5 SPL-311-13263
Gold 65 SPL-311-01613 (in boxes)
2007 Expedition EL
Red 67.5 SPL-311-13263
Gold 65 SPL-311-01613 (in boxes)
2007 Expedition EL