What did you do TO or FOR your Datsun today?(Roadsters only)
Moderators: notoptoy, S Allen, Solex68
- Curtis
- Site Supporter
- Posts: 4143
- Joined: Fri Jan 01, 2010 2:49 pm
- Location: Des Moines, WA
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
That looks very good. You coated inside and out? Seems like it would last better than the chrome in some ways.
66 stroker, almost done.
67 basket case, paint coming soon.
67 basket case, paint coming soon.
- notoptoy
- Vendor-Site Supporter
- Posts: 9677
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
At work, we switched from chrome to a "prismatic Chrome" powder coat - the end result is amazing. The system is followed by a powder clear coat, and that is what really makes it pop. The key to a good application is sandblasting for a really even and clear surface that the paint can adhere too. These look really good and a major improvement over the red!
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
boy is it . even I wouldn't paint a bumper red .lol.notoptoy wrote: ↑Sun Feb 17, 2019 3:19 pm We switched from chrome to a "prismatic Chrome" with a powder coat - the end result is amazing. The system is followed by a powder clear coat, and that is what really makes it pop. The key to a good application is sandblasting for a really even and clear surface that the paint can adhere too. These look really good and a major improvement over the red!
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- theunz
- Roadster Nut-Site Supporter
- Posts: 2423
- Joined: Sat May 02, 2009 1:54 pm
- Location: Catoosa Ok.
- Model: 2000
- Year: High Windshield-68-70
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Looking good. That was time and money well spent!
Mike M
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!)
1969 Porsche 911s -worth more, but not as valuable! Gone!
2017 Lotus Evora 400 - Oh my!!
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!)
1969 Porsche 911s -worth more, but not as valuable! Gone!
2017 Lotus Evora 400 - Oh my!!
- #009
- Roadster Fanatic
- Posts: 111
- Joined: Fri Oct 30, 2015 12:19 pm
- Location: Concord, CA
- Contact:
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Replaced both rear wheel cylinders, installed new rear shoes and Koni shocks. Premo stopped by to provide a helping hand on the brakes. Off course job is not complete until Dave and I have our celebratory whiskey! I say it was a productive Presidents Day
You do not have the required permissions to view the files attached to this post.
- AidanDawn2000
- Roadsteraholic
- Posts: 1018
- Joined: Fri Aug 14, 2015 6:33 pm
- Location: Santa Cruz, CA
- Contact:
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Quite an improvement! What did you set the konis to?
Oil a little low? Time to get a longer dipstick:)
Instagram!!!
1968 2000 SRL311-05110 (first car! Rust Bucket. Sold )
1969 2000 SRL311-10440 (matching numbers, Solex!)
Instagram!!!
1968 2000 SRL311-05110 (first car! Rust Bucket. Sold )
1969 2000 SRL311-10440 (matching numbers, Solex!)
-
- Roadster Fanatic-Site Supporter
- Posts: 1790
- Joined: Sat Nov 21, 2009 11:37 pm
- Location: Vancouver, Washington
- Model: 1500/1600
- Year: High Windshield-68-70
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Got the gas gauge working on the /68. I had to depin one of the connectors that was intermittent. Turns out the small flanges that hold the connectors to the pins on the sender was smashed flat. A little prying a wiggling and got that part fixed. Cleaned off the black paint on the wires so I could tell which is yellow, cleaned the connectors and presto, fuel gauge works!!
Mounted a backup light after fixing it. Now I've gotta find out why there's no voltage in that circuit.
Dan
Mounted a backup light after fixing it. Now I've gotta find out why there's no voltage in that circuit.
Dan
SPL311 aka Skooter. Sold. Now wasting away in the SF area.
1990 Nissan 300zx. Sold this one too.
2018 VW Tiguan
1990 Nissan 300zx. Sold this one too.
2018 VW Tiguan
- #009
- Roadster Fanatic
- Posts: 111
- Joined: Fri Oct 30, 2015 12:19 pm
- Location: Concord, CA
- Contact:
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Aidan,
According to Dave, soft in the back and stiff in the front (not sure exactly how many turns but I know its not on the fully stiff setting). How did you set yours up?
According to Dave, soft in the back and stiff in the front (not sure exactly how many turns but I know its not on the fully stiff setting). How did you set yours up?
- #009
- Roadster Fanatic
- Posts: 111
- Joined: Fri Oct 30, 2015 12:19 pm
- Location: Concord, CA
- Contact:
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Test drove my car to Dave's house after installing the Konis and came across a little roadster party. Finally had the chance to meet Steve and Alex. Dave and Steve were busy working on the transmission while Alex tried installing his Konis. I just took pictures..
You do not have the required permissions to view the files attached to this post.
- Bigtaku
- Roadster Fanatic
- Posts: 408
- Joined: Mon Dec 26, 2016 4:10 pm
- Location: Dayton, Nevada
- Model: 1500/1600
- Year: High Windshield-68-70
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
I love the mirror placement on the red car. Form over function, I still need to drill my holes for the mirrors and want them on the fenders forward just like this but I know they will be hard to see out of. Just looks awesome
Michael Montez
- #009
- Roadster Fanatic
- Posts: 111
- Joined: Fri Oct 30, 2015 12:19 pm
- Location: Concord, CA
- Contact:
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Indeed the fender mirrors are just for looks and pretty useless. Previous owner installed them there and I had to put the Japanese rising sun decal to hide the OEM mirror holes. It is somewhat a conversational piece though.
- Bigtaku
- Roadster Fanatic
- Posts: 408
- Joined: Mon Dec 26, 2016 4:10 pm
- Location: Dayton, Nevada
- Model: 1500/1600
- Year: High Windshield-68-70
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
So on a scale from 1 to 10 and 10 being the mirrors usefulness at the antenna area, what would you give for a number with the mirrors forward. I had the mirrors on my doors with my previous roadster and the driver mirror worked fine but the passenger side was useless. Car is going for paint very soon and I need to make up my mind.
Michael Montez
- #009
- Roadster Fanatic
- Posts: 111
- Joined: Fri Oct 30, 2015 12:19 pm
- Location: Concord, CA
- Contact:
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
I would say around 9. Perhaps a larger mirror might help but the ones I have are pretty useless. I would like to remove them but don't want to see additional holes. I plan on getting them filled in when I get a paint job. If you're in the area you can stop by and check them out.
- vorpal
- Roadster Fanatic
- Posts: 269
- Joined: Fri Sep 21, 2012 2:32 pm
- Location: Edmonton, Alberta, Canada
- Model: 2000
- Year: High Windshield-68-70
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Just installed my mirrors on the fenders posted a couple pages back on this thread. I tested them in different locations and chose this spot as the most effective for visual, you have great rear view angle from both mirrors. Any further forward and your view field shrinks to uselessness.
https://www.311s.org/phpBB3/viewtopic.php?f=2&t=18124&start=3375#p288986
Of course, if you want the look, go further forward. You'll just be rubberneck shoulder-checking for every lane change
https://www.311s.org/phpBB3/viewtopic.php?f=2&t=18124&start=3375#p288986
Of course, if you want the look, go further forward. You'll just be rubberneck shoulder-checking for every lane change
Rob
1969 Datsun 2000 Solex # 12921
1967.5 Datsun 1600 # 14262
1990 300ZX Twin Turbo
1993 300ZX Convertible
new garage DONE Oct 2019!!!
Edmonton, Canada
1969 Datsun 2000 Solex # 12921
1967.5 Datsun 1600 # 14262
1990 300ZX Twin Turbo
1993 300ZX Convertible
new garage DONE Oct 2019!!!
Edmonton, Canada
- notoptoy
- Vendor-Site Supporter
- Posts: 9677
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: What did you do TO or FOR your Datsun today?(Roadsters only)
Finally got around to installing JT's Bilsteins, replacing the Koni's. Got everything installed, but still can't drive it as I have a beautiful stainless exhaust that needs to go on too....maybe this weekend for the exhaust.
You do not have the required permissions to view the files attached to this post.
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG