Windshield pad replacement

[redroadster68]

Hi all
Has anyone replaced the interior windshield pads.. ( 3 padded sections around the windscreen). Tips on install? What adhesive did you use?
68,2000.

[mraitch]

Weldwood Contact Adhesive.

Also use a whole pile of clothes pins/pegs to hold edges.

[redroadster68]

yes indead, I used a whole lot of clamps of differing shapes and sizes. turned out looking awesome

[redroadster68]

IMG_6465.PNG

yes indead, I used a whole lot of clamps of differing shapes and sizes. turned out looking awesome

[redroadster68]

Windshield trim complete

[redroadster68]

Windshield trim complete

[ppeters914]

Anyone else notice an echo?

[redroadster68]

Say what? Say what? Say what?

[ppeters914]

[ACote]

Looks nice! I need to do mine soon

[julietbaney]

thank you guys! really appreciated your comments. maybe i'm worry too much about windshield replacement. but from when i read, i don't see safelite mention rubber dam during the replacement, when i look up honda part, there are rubber dams in the diagram, do they skip this part?

[Lorna c]

hey , I thought that the inner rubber was all in one with the outer ?? am I misunderstanding this ? I planned on popping.my windshield one day , have the molding for our windshield (I hope ) do I need more.

[Bigtaku]

I have my three piece all cut and ready to glue in. The driver side is flush against the window frame but the passenger side has a gap. I was thinking of using a heat gun to make it fit tight but don't want to melt the plastic. If we have a choice, what comes first, the trim or the windshield?

[Bigtaku]

IMG_6465.PNGyes indead, I used a whole lot of clamps of differing shapes and sizes. turned out looking awesome

I see you did not tuck the trim under the windshield weatherstrip. Did it stay this way?

[Bigtaku]

IMG_6465.PNGyes indead, I used a whole lot of clamps of differing shapes and sizes. turned out looking awesome

I see you did not tuck the trim under the windshield weatherstrip. Did it stay this way?

IMG_3938_LI.jpg