Seat Belt Help (I searched first)

[Dat4fun]

So I did a search and there is a thread that answers this question but the photos are no longer valid.

Anyways I have a 66 and just got seat belts as it didn't come with the car. Problem is the entire floor is covered in dynamat. So I don't know where I should look for the mounting holes, the type of bolts needed and so fourth.

Any help would be appreciated.

[Nissanman]

Here are some pics of the anchor locations in my '65, yours should be the same: -

09032016034.jpg

09032016035.jpg

You should be able to find the captive nuts for all anchors looking under the car.
Poke a scribe or a nail through the holes and then cut around the location from inside the cabin

[Dat4fun]

Thanks a million!!!

[Nissanman]

That works out to $1,348,900 in AUD

[Dat4fun]

So happy to have a little safety!

image.jpeg

[AC77]

I know this is an old post, but seeing the bolt hole locations saved me a bunch of time. I was able to get my belts installed quickly and take my son out for a ride this morning. Thanks

[Skyman]

I recently found out that the lap belts work pretty good.

[AC77]

Not something fun to find out. Glad they work as advertised.

[mraitch]

Think there is also a hole for a shoulder strap in the rear wheel well on the parcel shelf.

[mraitch]

A) Are all these knobs correct for a 70 1600 - pls confirm or negate.
B) Does anyone have pix of the rest of the correct knobs - i.e. a picture of a 70 dash pad - I have SO many knobs and no way of identifying which are correct.

thanks

Pete

[SLOdatsun]

So I did a search and there is a thread that answers this question but the photos are no longer valid.

Anyways I have a 66 and just got seat belts as it didn't come with the car. Problem is the entire floor is covered in dynamat. So I don't know where I should look for the mounting holes, the type of bolts needed and so fourth.

Any help would be appreciated.

Where did you find belts? My roadster came with a mismatched pair for a Z car and they look and act like garbage. Thanks in advance!

[devo]

So I did a search and there is a thread that answers this question but the photos are no longer valid.

Anyways I have a 66 and just got seat belts as it didn't come with the car. Problem is the entire floor is covered in dynamat. So I don't know where I should look for the mounting holes, the type of bolts needed and so fourth.

Any help would be appreciated.

Where did you find belts? My roadster came with a mismatched pair for a Z car and they look and act like garbage. Thanks in advance!

https://www.seatbeltsplus.com/category/ ... belts.html

https://www.retrobelt.com

[SLOdatsun]

So I did a search and there is a thread that answers this question but the photos are no longer valid.

Anyways I have a 66 and just got seat belts as it didn't come with the car. Problem is the entire floor is covered in dynamat. So I don't know where I should look for the mounting holes, the type of bolts needed and so fourth.

Any help would be appreciated.

Where did you find belts? My roadster came with a mismatched pair for a Z car and they look and act like garbage. Thanks in advance!

https://www.seatbeltsplus.com/category/ ... belts.html

https://www.retrobelt.com

Thanks man! I found some good stuff through Ssnake-Oyl products too.

[dbrick]

SSnake Oyl looks to have some nice stuff, about the same price as Amazon, so why not use a "real" car vendor.

[mraitch]

you can find floor holes, by poking around from the bottom.

the other holes are on the wheel wells - same procedure.