Help me Identify where these bolts go!
Moderators: notoptoy, S Allen, Solex68
-
- Roadster Nut
- Posts: 25
- Joined: Sun Sep 09, 2018 11:45 am
- Location: North Carolina
Help me Identify where these bolts go!
They seem like important bolts
You do not have the required permissions to view the files attached to this post.
- Nissanman
- Roadster Fanatic-Site Supporter
- Posts: 3375
- Joined: Mon Apr 16, 2007 8:07 pm
- Location: Adelaide, South Australia
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: Help me Identify where these bolts go!
The pair in the RH pic. look like conrod bolts.
Nissanman, just trying to help.
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
- theunz
- Roadster Nut-Site Supporter
- Posts: 2413
- Joined: Sat May 02, 2009 1:54 pm
- Location: Catoosa Ok.
- Model: 2000
- Year: High Windshield-68-70
Re: Help me Identify where these bolts go!
The ones with the knurled ends may be to hold the tach and speedo in the dash.
Mike M
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!)
1969 Porsche 911s -worth more, but not as valuable! Gone!
2017 Lotus Evora 400 - Oh my!!
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!)
1969 Porsche 911s -worth more, but not as valuable! Gone!
2017 Lotus Evora 400 - Oh my!!
-
- Roadster Nut-Site Supporter
- Posts: 1736
- Joined: Fri Feb 13, 2015 8:08 pm
Re: Help me Identify where these bolts go!
2X connrod bolts. My roadster has only around 25 bolts still in it and I haven't seen any like the ones on the left.
located in Chester NH
1967 1600 in restoration
2013 Arctic Cat F-1100 turbo
Ford F-350 6.0
Ford 9000 puller, Ford 960 puller, Ford 901show, Ford 971 worker, Oliver 70 waiting its turn
1967 1600 in restoration
2013 Arctic Cat F-1100 turbo
Ford F-350 6.0
Ford 9000 puller, Ford 960 puller, Ford 901show, Ford 971 worker, Oliver 70 waiting its turn
- bobd
- Roadster Nut-Site Supporter
- Posts: 456
- Joined: Mon Sep 01, 2008 12:46 pm
- Location: Lakeland, FL
- Model: 2000
- Year: High Windshield-68-70
Re: Help me Identify where these bolts go!
Neither one looks like anything I have seen on my roadster. The bolts look like they could go through a bushing and I can't imagine what the knurled screws would do - possibly carb linkage?
'69 1600 with SR20DE
- mshort07
- Roadster Fanatic
- Posts: 249
- Joined: Mon Jul 23, 2012 8:45 pm
- Location: Urbanna Va
Re: Help me Identify where these bolts go!
Don’t think it’s carb linkage. They’re over 5 inches long and about 1/2†diameter.
Are the bolts in the bottom picture the bolts that hold the front of the rear leaf springs on the frame?
The 1st picture bolts - haven’t seen them before.
Are the bolts in the bottom picture the bolts that hold the front of the rear leaf springs on the frame?
The 1st picture bolts - haven’t seen them before.
Matt
Urbanna VA
1969 SRL311 / 1967 SPL311 - Resto Project
1967 SPL311 - Donor Car - long gone
1967 SPL311 - Donor Car - long gone
1968 SRL311 - Donor Car - long gone
1968 Datsun 520 pickup
1993 Jeep
Urbanna VA
1969 SRL311 / 1967 SPL311 - Resto Project
1967 SPL311 - Donor Car - long gone
1967 SPL311 - Donor Car - long gone
1968 SRL311 - Donor Car - long gone
1968 Datsun 520 pickup
1993 Jeep
- theunz
- Roadster Nut-Site Supporter
- Posts: 2413
- Joined: Sat May 02, 2009 1:54 pm
- Location: Catoosa Ok.
- Model: 2000
- Year: High Windshield-68-70
Re: Help me Identify where these bolts go!
Do you have an after market air filter/ filters? The knurled ones are obviously made for something that only needs to be finger tight. If they go to your car, then they are for something aftermarket. I did a frame off on mine and did not have anything like those on my 69, don't know about any other years.
Mike M
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!)
1969 Porsche 911s -worth more, but not as valuable! Gone!
2017 Lotus Evora 400 - Oh my!!
Old enough to know better, too old to remember why!
1969 2000 solex mine since 1972, under resurrection. (Finally resurrected as of spring 2019!)
1969 Porsche 911s -worth more, but not as valuable! Gone!
2017 Lotus Evora 400 - Oh my!!
-
- Roadsteraholic
- Posts: 661
- Joined: Mon Oct 28, 2013 1:59 pm
- Location: Bellingham, Washington
Re: Help me Identify where these bolts go!
The bottom picture bolts look like leaf spring front hangar bolts to me. Not sure on the knurled top pic bolts.
Dan
1964 Datsun SPL310. The Datsun
1997 Toyota Tacoma LX 4wd. The Truck
2009 Subaru Forester XT.
2017 Toyota AWD Swagger Wagon.
1964 Datsun SPL310. The Datsun
1997 Toyota Tacoma LX 4wd. The Truck
2009 Subaru Forester XT.
2017 Toyota AWD Swagger Wagon.
- GeoffM
- Roadster Fanatic-Site Supporter
- Posts: 1600
- Joined: Thu May 22, 2008 2:28 pm
- Location: Vancouver BC
-
- Talented Enthusiast
- Posts: 2922
- Joined: Sun Jan 27, 2013 9:43 am
- Location: Cumming, GA
Re: Help me Identify where these bolts go!
I think this is correct if they are the right length.Toptech360 wrote: ↑Mon Jan 14, 2019 3:37 pm The bottom picture bolts look like leaf spring front hangar bolts to me.
Don't recognized the knurled ones either- what size thread are they?
LT/JT
https://www.datsunrestorationproducts.com/
Only the very BEST parts for your Datsun- 10000's of items in stock
New, Used and Reproduction!
https://www.datsunrestorationproducts.com/
Only the very BEST parts for your Datsun- 10000's of items in stock
New, Used and Reproduction!