choke connecting rods
Moderators: notoptoy, S Allen, Solex68
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: choke connecting rods
they were so messed up it was hard to even get it to hook to the jet without lifting the arm to drop the plunger .. it's amazing how far pushed up they were compared to their resting spots !! so this should help out allot I hope ... still nervous to complete and have not fix it still . . haha it's something that has happened too many times already . I'm just stalling so I keep typing . haha ok here I go .
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: choke connecting rods
we'll heck . it's not fixed yet . I'm going in to see if I created another issue like a leak or something .
Also I found that the shaft that holds the needle up in the jet , is that supposed to be flush with the piston or only the ledge on the needle ? if anyone is still looking here I'd appreciate if you know ..
Also I found that the shaft that holds the needle up in the jet , is that supposed to be flush with the piston or only the ledge on the needle ? if anyone is still looking here I'd appreciate if you know ..
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: choke
I GOT IT I GOT IT WE GOT IT ..
YESSSSSS ITS DIALED IN AND PROBLEM SOLVED WITH THE IDLING ISSUE IVE HAD FOREVER .
Wow that was fun !
Had to first straighten those connecting rods to each choke-to-jet so they sat at rest in the space allotted . Then had to lower my needles a bit , messed with them up then down twice, and now it'll run just right at idle .. after I had to readjust the points , for some reason they were way off now , set timing , then adjusted the carbs . Ooh after I cut out the bends in fuel line that lead from the side of the car into the motor . It seemed that's where my fuel would still hang up so I put in soft lines for the last couple feet . Now it delivers fuel without hangup . (That makes a big difference too .) And poof . The timing fell right in without dropping one more time into stagnant (as the book calls it lol) .. anyway thanks y'all . I'm sure that rides over now ... Hahaha .. just a couple days ago I was talking to a friend and I said "man I really need to know what I don't know". and he laughed .. and i laughed . . And now I know what I didn't know . The choke levers need to be at full rest without the bottom screw in that holds it to the lever to plunge it .. now I know those can't be the correct terms and sorry but. I got it I got it I got it !! Hahahahah over and out ! Sleep time ...
YESSSSSS ITS DIALED IN AND PROBLEM SOLVED WITH THE IDLING ISSUE IVE HAD FOREVER .
Wow that was fun !
Had to first straighten those connecting rods to each choke-to-jet so they sat at rest in the space allotted . Then had to lower my needles a bit , messed with them up then down twice, and now it'll run just right at idle .. after I had to readjust the points , for some reason they were way off now , set timing , then adjusted the carbs . Ooh after I cut out the bends in fuel line that lead from the side of the car into the motor . It seemed that's where my fuel would still hang up so I put in soft lines for the last couple feet . Now it delivers fuel without hangup . (That makes a big difference too .) And poof . The timing fell right in without dropping one more time into stagnant (as the book calls it lol) .. anyway thanks y'all . I'm sure that rides over now ... Hahaha .. just a couple days ago I was talking to a friend and I said "man I really need to know what I don't know". and he laughed .. and i laughed . . And now I know what I didn't know . The choke levers need to be at full rest without the bottom screw in that holds it to the lever to plunge it .. now I know those can't be the correct terms and sorry but. I got it I got it I got it !! Hahahahah over and out ! Sleep time ...
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: choke connecting rods
This book was in faded but prime shape a year ago !
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: choke connecting rods
And it wasn't a dream ! It's still good !
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: choke connecting rods
Picture of book won't load . This new phone I can't get it under 2MB to load picture . But it's one torn up and dirty book now ..
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: choke connecting rods
Time to let these hands heal !
You do not have the required permissions to view the files attached to this post.
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: choke connecting rods
Only 1624 threads to figure this out ! Oh my word . Wow
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- ACote
- Roadsteraholic
- Posts: 781
- Joined: Mon Mar 28, 2011 11:01 pm
- Location: Winnweiler, Germany
- Model: 2000
- Year: High Windshield-68-70
- Contact:
Re: choke connecting rods
Very nice. Always feels good to have it running properly. Take it for a drive! I like all the fun places to drive in California.
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: choke connecting rods
Oh I will ! Thx
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: choke connecting rods
Well it's kinda different now that's for sure . Everything I knew to be , isn't anymore , so dropping all down to zero again and reset .. it only responding different . Completely different . I can't explain it but it's different . It's probably only running lighter with the choke not half way engaged anymore or something . I'm trying not to over think it .. it'll go into time but dwell is way low for this to happen . Like 30 . And that's ×2 for the 4 cylinder.. otherwise it's firing too late . Turning the chassis to hear the number one on compression spark and it's either after top dead center and if I put it had a much larger size Gap making the dwell smaller it will fire at 10 degrees before top dead center.. so I'm looking to see if it's something I did somewhere else or if it's just the way this car is it's always like a larger Gap vs 60 on the dwell . So idk it's just all different..
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- notoptoy
- Vendor-Site Supporter
- Posts: 9677
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: choke connecting rods
Timing and dwell should not change with a carb adjustment! Dwell should also be independent of timing. Set the timing, then set the dwell.
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: choke connecting rods
Oh yeah ? Ok I'going.to try it that way ..thensee how it comes out . The throttle is ingaged it seems with them down is what's weird
. I'm going to hit it again now . So I'll do that way ..
. I'm going to hit it again now . So I'll do that way ..
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: choke connecting rods
Does anyone know the length of these supposed to be ??
You do not have the required permissions to view the files attached to this post.
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- jhayden
- Site Supporter
- Posts: 481
- Joined: Tue Oct 25, 2011 4:16 pm
- Location: Tyler, TX
Re: choke connecting rods
Lorna, notoptoy is one of the best sources of information and encouragement on this website, but even he can err (but not often!). The order should be:
"Point gap and dwell affect timing, but timing does not affect point gap and dwell. So, set point gap/dwell first, then timing." Only after you have those dialed in should you attempt carb adjustment.
Bon chance!
Jon