Here's where I am.
- Frame out and old windshield removed
- All windshield channels cleaned up
- Chrome cleaning/polishing mostly done
First, any and all advice is appreciated. My question is, do I use any adhesive when installing my new windshield and rubber? The old stuff was pretty stuck in the channels, so I assume something was used with the last install. Just not sure if it's required or necessary.
Thanks,
Adam
Low windshield install advice
Moderators: notoptoy, S Allen, Solex68
- AC77
- Roadster Fanatic-Site Supporter
- Posts: 472
- Joined: Thu Jun 22, 2017 11:21 am
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3925
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: Low windshield install advice
David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
- AC77
- Roadster Fanatic-Site Supporter
- Posts: 472
- Joined: Thu Jun 22, 2017 11:21 am
Re: Low windshield install advice
Thanks Dave, that's just what I was looking for.