New Member from Quebec
Moderators: notoptoy, S Allen, Solex68
- AC77
- Roadster Fanatic-Site Supporter
- Posts: 472
- Joined: Thu Jun 22, 2017 11:21 am
Re: New Member from Quebec
Curious if you ever purchased a roadster...
- Pjackb
- Roadsteraholic
- Posts: 1300
- Joined: Fri Nov 04, 2016 2:49 pm
- Location: Montreal,Qc & Plattsburgh,NY
Re: New Member from Quebec
Nope not yet,AC77 wrote:Curious if you ever purchased a roadster...
Due to some unexpected circumstances I had to postpone my projeçt to get a roadster a few months which actually has been a good thing as I have continued to learn much about these cars and know more clearly what I want
It also help me build a very good list of potential cars to buy Ike the two 66s i posted previously . But I have to be honest and say that because I had to wait I also missed a few good ones
- Pjackb
- Roadsteraholic
- Posts: 1300
- Joined: Fri Nov 04, 2016 2:49 pm
- Location: Montreal,Qc & Plattsburgh,NY
Re: New Member from Quebec
Hey guys , looking to make an offer to someone on his car and parts , I know what most of the stuff that come with the cars is worth but there are a few things I’m not sure about
So if you could give some guidelines on the following items that would help
Full U20 NOS timing set including chain guide , tensioner etc.
Almost new (9/10) early Solex Air filter assembly
NOS Solex air filter elements
NOS Solex velocity horns
Thanks
JackB
So if you could give some guidelines on the following items that would help
Full U20 NOS timing set including chain guide , tensioner etc.
Almost new (9/10) early Solex Air filter assembly
NOS Solex air filter elements
NOS Solex velocity horns
Thanks
JackB
- 2mAn
- Roadsteraholic
- Posts: 2238
- Joined: Mon Jan 09, 2017 5:02 pm
- Location: Westchester, CA
- Model: 2000
- Year: High Windshield-68-70
Re: New Member from Quebec
Those are all big $$$
Im spending ~$1000 on the timing stuff
Im spending ~$1000 on the timing stuff
Simon
Current Cars:
-1999 Porsche 911 4/98-build, 3.8L M96
Current Cars:
-1999 Porsche 911 4/98-build, 3.8L M96
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: New Member from Quebec
Just go to the vendor sites to price the parts. Simon is right.
Linda
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
- Pjackb
- Roadsteraholic
- Posts: 1300
- Joined: Fri Nov 04, 2016 2:49 pm
- Location: Montreal,Qc & Plattsburgh,NY
Re: New Member from Quebec
Thanks Linda,Linda wrote:Just go to the vendor sites to price the parts. Simon is right.
Linda
Maybe I should clarify , These are all genuine Nissan unobtainium parts still in boxes and not reproductions
Since I have access to an already rebuilt engine I'm trying to see how much this stuff is worth to determine
1) how much to offer and
2) would i be able to finance the purchase of the engine trough the sale of the parts ( I already have the Solexes and Head with Bcam)
- PandaBoy
- Site Supporter
- Posts: 117
- Joined: Thu May 21, 2015 1:35 pm
- Location: Ridgeway, ON Canada
- Model: 2000
- Year: High Windshield-68-70
Re: New Member from Quebec
Jacques, I think that the NOS Solex velocity horns should be in the $250 - $300 range.
Also, I have a late (still in the original carton) NOS Solex Air filter assembly that I value in the $900 - $1,000 range.
Just my opinion.
Also, I have a late (still in the original carton) NOS Solex Air filter assembly that I value in the $900 - $1,000 range.
Just my opinion.
Michael Borysenko
Ridgeway, ON Canada
1969 SRL311-10641
1990 Porsche 928 S4
2007 Infiniti FX45
2009 Infiniti FX50S
Ridgeway, ON Canada
1969 SRL311-10641
1990 Porsche 928 S4
2007 Infiniti FX45
2009 Infiniti FX50S
- cole455
- Roadsteraholic
- Posts: 580
- Joined: Tue Oct 23, 2007 12:03 pm
- Location: Lewisville, NC
Re: New Member from Quebec
Not sure on the timing set, maybe talk to Ross since it’s nos stuff?
The last early, open element filter I bought was $700, shipped almost 1.5 years ago...
The last early, open element filter I bought was $700, shipped almost 1.5 years ago...
-
- Talented Enthusiast
- Posts: 2962
- Joined: Sun Jan 27, 2013 9:43 am
- Location: Cumming, GA
Re: New Member from Quebec
You are certainly free to spend your money as you like, but IMHO the NOS gears are a waste of money. The sprockets we build exceed the quality of the the Nissan gears. They were spec'd and machined by an aerospace certified contractor.
Stan's have a good track record as well.
The early OEM crank and all the small JS, and cam gears are the worst offenders. The Nissan gears are nothing special, thrown out dozens...I doubt many people would give you more than 100 per gear since higher quality parts are available now that allow adjustable cam timing. Ive dumped most the Nissan gears I had. Vendors might pay you 50 a gear.
Same with the oem filter. Its only worth big bucks to a 1/2 year owner who insists on original. If it goes much past the cost of the ultra nice reproduction, 95% will be more than happy with the repro part for less money. As you prefer, j.
Stan's have a good track record as well.
The early OEM crank and all the small JS, and cam gears are the worst offenders. The Nissan gears are nothing special, thrown out dozens...I doubt many people would give you more than 100 per gear since higher quality parts are available now that allow adjustable cam timing. Ive dumped most the Nissan gears I had. Vendors might pay you 50 a gear.
Same with the oem filter. Its only worth big bucks to a 1/2 year owner who insists on original. If it goes much past the cost of the ultra nice reproduction, 95% will be more than happy with the repro part for less money. As you prefer, j.
LT/JT
https://www.datsunrestorationproducts.com/
Only the very BEST parts for your Datsun- 10000's of items in stock
New, Used and Reproduction!
https://www.datsunrestorationproducts.com/
Only the very BEST parts for your Datsun- 10000's of items in stock
New, Used and Reproduction!
- Pjackb
- Roadsteraholic
- Posts: 1300
- Joined: Fri Nov 04, 2016 2:49 pm
- Location: Montreal,Qc & Plattsburgh,NY
Re: New Member from Quebec
Thank you all for your responses , this is useful
-
- Talented Enthusiast
- Posts: 2962
- Joined: Sun Jan 27, 2013 9:43 am
- Location: Cumming, GA
Re: New Member from Quebec
Jack, here is some even better input, perhaps the best I can give you. If I were you, I'd find the best complete, running driving, restored or semi restored car I could afford and buy that. If you try to build yourself a car by buying parts here and there, start rebuilding or buy an engine/trans etc, or picking odd and end pieces as you find them, or buy someone elses abandoned project, unless you are a very good mechanic yourself, and have considerable experience specific to roadsters, there is a good chance you'll never wind up with a decent car you can actually drive.
For instance Mike Young has a great running low miles 69 2L that you could buy for less than you could even think about rebuilding an original 2L for. It runs great, drives and stops great and has had a lot of pro work. Very original, not screwed up by ham fisted mechanics...Best thing is, it works right now! Word to the wise....
For instance Mike Young has a great running low miles 69 2L that you could buy for less than you could even think about rebuilding an original 2L for. It runs great, drives and stops great and has had a lot of pro work. Very original, not screwed up by ham fisted mechanics...Best thing is, it works right now! Word to the wise....
LT/JT
https://www.datsunrestorationproducts.com/
Only the very BEST parts for your Datsun- 10000's of items in stock
New, Used and Reproduction!
https://www.datsunrestorationproducts.com/
Only the very BEST parts for your Datsun- 10000's of items in stock
New, Used and Reproduction!
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: New Member from Quebec
Still, you get a lot of points if you restore/assemble a car yourself. There are many guys who enjoy that part the most, more than driving.
So, to each his own.
If you have done it yourself with good guidance I think your confidence in the car rises alot.
If you can do it, a solid restoration that takes awhile can be offset with a little beater Roadster you can blast around in and have fun. Pass it along once the other is done as a starter car for someone else.
Linda
So, to each his own.
If you have done it yourself with good guidance I think your confidence in the car rises alot.
If you can do it, a solid restoration that takes awhile can be offset with a little beater Roadster you can blast around in and have fun. Pass it along once the other is done as a starter car for someone else.

Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
-
- Talented Enthusiast
- Posts: 2962
- Joined: Sun Jan 27, 2013 9:43 am
- Location: Cumming, GA
Re: New Member from Quebec
I wasn't trying to help Jack get points, was trying to help him actually own a roadster. From what I've seen over the years, about 80% of guys who buy a project car can't or won't end up finishing it, for any number of reasons (life gets in the way)
LT/JT
https://www.datsunrestorationproducts.com/
Only the very BEST parts for your Datsun- 10000's of items in stock
New, Used and Reproduction!
https://www.datsunrestorationproducts.com/
Only the very BEST parts for your Datsun- 10000's of items in stock
New, Used and Reproduction!
- AC77
- Roadster Fanatic-Site Supporter
- Posts: 472
- Joined: Thu Jun 22, 2017 11:21 am
Re: New Member from Quebec
I think it all depends what you want. Parts for these cars are more expensive than other classics. I can see how one would underestimate cost to get a project on the road. And projects that stretch over years if you're not prepared can seem never-ending.
- Alvin
- Roadster Nut-Site Supporter
- Posts: 8381
- Joined: Tue Jan 23, 2007 7:01 pm
Re: New Member from Quebec
I'm here for the points
Alvin Gogineni
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
Instagram
YouTube
My SR20 Build Thread
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
YouTube
My SR20 Build Thread