The Quick/Small/(Stupid?) Question Thread-take 2

[dynaguy]

[quote="DatsunRoadster2000"]1969 - 2000

1. Does anyone know the size of the bolts that are connected to the seat rails, that secure the seats to the floor?

2. Does anyone know the bolt size needed to mount the seat belts to the holes on the tunnel and down by the door?



I used 7/16-20 x 1-1/4" for the seat belts. 5/16-24 ny-loks for the seat rails. Pat

[DatsunRoadster2000]

1969 - 2000

1. Does anyone know the size of the bolts that are connected to the seat rails, that secure the seats to the floor?

2. Does anyone know the bolt size needed to mount the seat belts to the holes on the tunnel and down by the door?



I used 7/16-20 x 1-1/4" for the seat belts. 5/16-24 ny-loks for the seat rails. Pat

Thanks Pat!

[cktrap]

"If you can park it, and not turn around to look at it when you walk away..
...you haven't bought the right car."

Jeff Bergen

Truth

What if you look twice??
Keith

[AidanDawn2000]

Can someone explain how this is meant to mount up? First time using a hard top!

IMG_0947.JPG

Also, those infernal latches refuse to all stay latched at the same time!

IMG_0948.JPG

[bobd]

Not sure of the factory fitting, but I used eye bolts.

[notoptoy]

I have eyebolts as well, with a wing nut on top for quick installation. I have posted pics in the past, but don’t have them handy at the moment.

[AC77]

Can someone explain how this is meant to mount up? First time using a hard top!
IMG_0947.JPG

Also, those infernal latches refuse to all stay latched at the same time!
IMG_0948.JPG

This is what I was able to find on the forum.
http://www.311s.org/phpBB3/viewtopic.php?f=2&t=28621

[theunz]

I have that exact same hardtop which I bought new in the mid sevenths and it was supplied with eye bolts for installation.

[mraitch]

for SOME hardtops - there is a hole on either side for a bolt to go through - not to mention the 'catch' at the back of the coskpit.

[Lorna c]

how do you put a picture of your car with
your name on here ?

[Lorna c]

can you only put your distributor 180° out OR correct ? meaning is there any other mistake you can make on installing it besides 180° turned ? doesn't seem like it to me but I don't know .

[notoptoy]

If you do not mess with the Oil pump drive gear (which requires removing the tower), then yes, only two possibilities. If you mess with the pump drive, you can create all sorts of variations.

[pebbles]

how do you put a picture of your car with
your name on here ?

user control panel
profile
edit avatar
browse
open
add file, must reduce file size to iddy biddy.
or ask Notop to do it

[AC77]

Yep, width = iddy x height = biddy

[Nissanman]

Maximum dimensions; width: 140 pixels, height: 140 pixels, file size: 102.00 KiB.