interior stickshift and ashtray stainless steel area .
Moderators: notoptoy, S Allen, Solex68
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
interior stickshift and ashtray stainless steel area .
how can you remove this ? I want to cut wood and stain it the way I have that pocket armrest wood I have . if anyone knows ?. pls
You do not have the required permissions to view the files attached to this post.
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Alvin
- Roadster Nut-Site Supporter
- Posts: 8286
- Joined: Tue Jan 23, 2007 7:01 pm
Re: interior stickshift and ashtray stainless steel area .
Now THAT is a shift knob!
If I had that I would yell FORE! while shifting into 4th gear
I remember seeing a custom, full wood center console from shifter to armest I will try to find pics.
It would require you to remove your entire console.
If I had that I would yell FORE! while shifting into 4th gear
I remember seeing a custom, full wood center console from shifter to armest I will try to find pics.
It would require you to remove your entire console.
Alvin Gogineni
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
Instagram
YouTube
My SR20 Build Thread
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
YouTube
My SR20 Build Thread
- Alvin
- Roadster Nut-Site Supporter
- Posts: 8286
- Joined: Tue Jan 23, 2007 7:01 pm
Re: interior stickshift and ashtray stainless steel area .
Contact "ralph" and "mlwebb" on the forum. You can see some Ralph's wooden console:
Mlwebb can give you advice on the center console done in wood. I'm not sure you want bare wood to be so close to the transmission so I'm sure there's insulation involved
Mlwebb can give you advice on the center console done in wood. I'm not sure you want bare wood to be so close to the transmission so I'm sure there's insulation involved
Alvin Gogineni
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
Instagram
YouTube
My SR20 Build Thread
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
YouTube
My SR20 Build Thread
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3925
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: interior stickshift and ashtray stainless steel area .
Not much help, Ive never had a Roadster with a shift plate and center console.
I think there are four screws in the bottom of the console box, and a couple in the shift plate. Remove the console and flip it over. Again I think there are 6 screws securing the ashtray slider and cl trim.
Good luck with the ciggy stoker.
https://www.mydipkit.com
I think there are four screws in the bottom of the console box, and a couple in the shift plate. Remove the console and flip it over. Again I think there are 6 screws securing the ashtray slider and cl trim.
Good luck with the ciggy stoker.
https://www.mydipkit.com
David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: interior stickshift and ashtray stainless steel area .
well never mind ! that was for a perfect template . I'll do it by measurements ..haha sounds like their up under the car to get to screws . but I like the look and the one in the picture . I thought about doing the dash too but I have the foam kind but maybe an inlay ? idk yet . u just don't want to leave it like that . ya know .
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: interior stickshift and ashtray stainless steel area .
and do you have to remove the windshield to get the dash out ?
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: interior stickshift and ashtray stainless steel area .
when u guys say entire console unit , is that the dash too ? and idk if I can . screws are stripped or something ..Alvin wrote:Now THAT is a shift knob!
If I had that I would yell FORE! while shifting into 4th gear
I remember seeing a custom, full wood center console from shifter to armest I will try to find pics.
It would require you to remove your entire console.
You do not have the required permissions to view the files attached to this post.
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- fj20spl311
- Roadsteraholic
- Posts: 5010
- Joined: Mon Nov 28, 2005 3:54 pm
- Location: San Diego, Ca
Re: interior stickshift and ashtray stainless steel area .
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
- 2mAn
- Roadsteraholic
- Posts: 2209
- Joined: Mon Jan 09, 2017 5:02 pm
- Location: Inglewood, CA
Re: interior stickshift and ashtray stainless steel area .
fj20spl311 wrote:You do not have to take the dash out to remove the center console.
haha I saw that and thought, that looks a lot like my center console... yikes!
Simon
Current Cars:
-1999 Porsche 911 4/98-build, 3.8L M96
Current Cars:
-1999 Porsche 911 4/98-build, 3.8L M96
- fj20spl311
- Roadsteraholic
- Posts: 5010
- Joined: Mon Nov 28, 2005 3:54 pm
- Location: San Diego, Ca
Re: interior stickshift and ashtray stainless steel area .
Thanks Simon.
Much easier to search through the forum for a picture than look through my storage.......LOL
Much easier to search through the forum for a picture than look through my storage.......LOL
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: interior stickshift and ashtray stainless steel area .
well that helps allot ! visuals always help . looks easy actually . those two on the top by the radio area , that's two nuts /screws . then I'm assuming in the box armrest has some , and any more ? #4-6 of them ? . boy that needs some love doesn't it . thank you .
checking out other buttons on this site . what's the difference between this response vs. hitting the quotations icon ? anyway . I'm sure Ill notice when I go to read it later ..
Last edited by Lorna c on Fri Oct 13, 2017 5:37 am, edited 1 time in total.
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: interior stickshift and ashtray stainless steel area .
when u said "bottom of the console box" I thought u meant under the car where the gear oil is and no room . now I get it .. hey why do u day look out for the cig thing ? what trick do I need to know ??pebbles wrote:Not much help, Ive never had a Roadster with a shift plate and center console.
I think there are four screws in the bottom of the console box, and a couple in the shift plate. Remove the console and flip it over. Again I think there are 6 screws securing the ashtray slider and cl trim.
Good luck with the ciggy stoker.
https://www.mydipkit.com
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .
- Lorna c
- Site Supporter
- Posts: 2428
- Joined: Sat Aug 20, 2016 12:47 am
- Location: central coast , ,ca
Re: interior stickshift and ashtray stainless steel area .
ok . good thinking on wood n firewall . although if it's that close to the dash I'm screwed anyway, weather it's wood or plastic. lol . I would have the year it doesn't come with wood . but anyway thanks for advice . I'm moving to it . need to kick it around to see the suggestions and prepare. I have power tools and now a welder too, almost nothing I can't do ..Alvin wrote:Contact "ralph" and "mlwebb" on the forum. You can see some Ralph's wooden console:
Mlwebb can give you advice on the center console done in wood. I'm not sure you want bare wood to be so close to the transmission so I'm sure there's insulation involved
"Is it me, or does everyone want to race ?"
late 68 1600 3 main motor .