Mothra SR20DE Swap in Florida

[Bigtaku]

Does anyone have any experience with the INFINITYBOX wiring harnesses and brains? ISIS is one of their products. Sad they picked that name but their products look like something I could use in my build.
http://infinitybox.com/restoration-and-performance/

[sfdaugherty]

I am using an ISIS system (the company has been rebranded Infinitybox). You can read my build thread and then ask me any questions you might have. The price has gone up quite a bit since I did mine.

Shannon

[RCMike]

The price has gone up quite a bit since I did mine.

Someone has to pay for the rebrand.. Can you imagine you brand an aftermarket parts company, and then suddenly... It's not like you can go after them for copyright..lol

[Bigtaku]

01616_8PixbjKX5rm_600x450.jpg

Just bought a Mazda RX7 differential! This is coming along nicely! Thank you for leading me in the right direction 311 people.
Comes with brakes and emergency brake set up to go! Now I just have to cut my drive shaft again...

[Gregs672000]

we're here to Help! Glad it worked out, and Fast! Exactly what you were looking for! Looks like a nice set up.

[Vinnyz]

01616_8PixbjKX5rm_600x450.jpgJust bought a Mazda RX7 differential! This is coming along nicely! Thank you for leading me in the right direction 311 people.
Comes with brakes and emergency brake set up to go! Now I just have to cut my drive shaft again...

Nice grab! I certainly would have jumped on it as well. Now where is my rear modded diff? Here kitty kitty!

[Bigtaku]

I really did luck out on the differential, Tacoma Boy does top notch work!

[Bigtaku]

Now I'm trying to get a 2013 Nissan 370Z rear view mirror with Homelink and night-day electronics installed and make it look good. not sure if its going to work but I sure like my Titan's. I've got spoiled entering my gated community and opening my garage door in the Titan. Plus I screwed up my old mirror trying to polish it. I'm hoping that I will be able to get the wires passed through with out to much trouble. Adapting the new mirror to the old ball is going to take some doing...

Update: I purchased a battery operated mirror from Nissan that does not need to be wired. Part number 999L1-V5100. This is a smaller and better choice.

IMG_0414.jpg

IMG_0415.jpg

[Bigtaku]

IMG_9018.JPG

Update on my body work.
The front fenders just need a little more finishing touches and they will be done. Going to round off a little of the sides of the airdam fwd of the front fenders to match the area above.

[Bigtaku]

My plan is to use the vertical parts only of the front bumper for a cobra ish look. I may just buy cobra front bumpers if I don't like the look.

[Pjackb]

Hey,
What are the specs on the Konigs?

[Bigtaku]

16x7 Konig Rewind on all four, started off with 205/55ZR16 and 245/50ZR16 BF Goodrich G-Force SP. Had to get a lower profile in the front to fit. Now I have 205/45ZR16X BF Goodrich G-Force Sport Comp-2 in the front. I also had to get the dust covers a talking to to fit under the Konig caps. But it all works!

[Bigtaku]

Now I'm trying to get a 2013 Nissan 370Z rear view mirror with Homelink and night-day electronics installed and make it look good. not sure if its going to work but I sure like my Titan's. I've got spoiled entering my gated community and opening my garage door in the Titan. Plus I screwed up my old mirror trying to polish it. I'm hoping that I will be able to get the wires passed through with out to much trouble. Adapting the new mirror to the old ball is going to take some doing...

Now that I have taken a look at the mirror, I don't like it. Time for Plan B, not sure what that is yet. (I updated this earlier, plan b is the battery operated mirror)

[Bigtaku]

New years update! After taking several months off my project to spend time with my dad in California. I'm excited to say the car is getting its final sanding before paint this week and the custom dash is being started. I have changed my mind on painting after I get all my work done due to costs and time. I think I have all the cutting done on the body and engine bay. I will update photos soon.

[Bigtaku]

new update to my update...
Just purchased my new Speed Hut dash gauges! Custom, Custom, Custom! Love them!!!!
Oh and I also received my new Stayfast Driftwood soft top! Getting all fuzzy feeling with excitement!