So I had an odd injury happen to one of my bowl lids..one of the corners with the screw hole broke off.
And on top of that, the fuel/vapor return deal on top of the rear carb bowl is totally shot and leaking fuel, and I need to find a new one.
Does anyone know of another lid and return valve that would work?
Or does anyone happen to have a spare lying around?
Rallye has them for a lot of $$, and requires some modding to the return valve. I am hoping to simply find a direct replacement for cheap. Thanks!
Interchangable float bowl lid?
Moderators: notoptoy, S Allen, Solex68
- S Allen
- Site Admin
- Posts: 4542
- Joined: Thu Dec 05, 2002 4:57 pm
- Location: Knoxville, IA(Lake Redrock)Emory, TX
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
RE:Float Bowl Covers
If I had one lying around you could have it. You can get by with using the float bowl covers from the early Z SUs. The Z float bowl covers use the hinged float instead of the floating floats. I put them on the 2 liter carbs I run on my stroker. The covers and floats were fairly inexspensive if I remember correctly. I know it would be easier to just replace the broken one. Some one has to have a spare in a box some where. Good luck!
Steve
Steve
66 Stroker-Going Orange
67 SRL311-00279-resto project
Stock '72 240Z-Blue
2002 Ford F250 7.3 Diesel 2WD Hauler
2008 Toyota FJ Cruiser
2009 Smart ForTwo Passion Coupe
2013 Fiat 500 Abarth
67 SRL311-00279-resto project
Stock '72 240Z-Blue
2002 Ford F250 7.3 Diesel 2WD Hauler
2008 Toyota FJ Cruiser
2009 Smart ForTwo Passion Coupe
2013 Fiat 500 Abarth