16X7 +11 PANASPORTS ON STOCK SUSPENSION
Moderators: notoptoy, S Allen, Solex68
-
- Roadster Fanatic
- Posts: 105
- Joined: Sun May 03, 2015 9:31 am
16X7 +11 PANASPORTS ON STOCK SUSPENSION
I need to know fairly quickly if 16x7 +11 panasports will work on my 67.5 1600. Suspension is stock. Plan on doing the 300zx brakes, and rx7 rear end as well in preparation of a SR20de swap eventually.
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3931
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: 16X7 +11 PANASPORTS ON STOCK SUSPENSION
i think you can have the RX7 diff narrowed to any width you want.
David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
- RCMike
- Roadsteraholic
- Posts: 2460
- Joined: Tue Mar 13, 2012 12:58 pm
- Location: Pomona, CA
Re: 16X7 +11 PANASPORTS ON STOCK SUSPENSION
Starting from 'every car is different'...
That is about the right offset for a 16x7..
That is about the right offset for a 16x7..
-
- Roadster Fanatic
- Posts: 105
- Joined: Sun May 03, 2015 9:31 am
Re: 16X7 +11 PANASPORTS ON STOCK SUSPENSION
I'm getting them. Hopefully they fit.
- garth
- Roadster Enthusiast
- Posts: 919
- Joined: Sat Jan 15, 2005 1:00 am
- Location: Delta, BC
- Model: 2000
- Year: High Windshield-68-70
- Contact:
Re: 16X7 +11 PANASPORTS ON STOCK SUSPENSION
My 15x7 +20s with 205/55 tires rub outside rear wells on hard turns. Suspension is stock. I will go to 195/55 in the future. Just sayin.
Garth
_________
68' 2000
_________
68' 2000
-
- Roadster Fanatic
- Posts: 105
- Joined: Sun May 03, 2015 9:31 am
Re: 16X7 +11 PANASPORTS ON STOCK SUSPENSION
I'm planning on going 195/50 or 195/55
- garth
- Roadster Enthusiast
- Posts: 919
- Joined: Sat Jan 15, 2005 1:00 am
- Location: Delta, BC
- Model: 2000
- Year: High Windshield-68-70
- Contact:
Re: 16X7 +11 PANASPORTS ON STOCK SUSPENSION
That should work.SERE Nate wrote:I'm planning on going 195/50 or 195/55

Garth
_________
68' 2000
_________
68' 2000
- fj20spl311
- Roadsteraholic
- Posts: 5038
- Joined: Mon Nov 28, 2005 3:54 pm
- Location: San Diego, Ca
Re: 16X7 +11 PANASPORTS ON STOCK SUSPENSION
Go 195/50
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
- Roman
- Site Supporter
- Posts: 1197
- Joined: Mon Apr 23, 2012 11:41 pm
- Location: Shasta, the lake, in the state of Jefferson!
- Contact:
Re: 16X7 +11 PANASPORTS ON STOCK SUSPENSION
I've known some to loosen up the body to frame bolts and move the body a bit.
These bodies aren't precision mounted and can sometimes rub on one side. But they can be shifted over slightly.
Sometimes rolling the lips of the fenders is needed.
These bodies aren't precision mounted and can sometimes rub on one side. But they can be shifted over slightly.
Sometimes rolling the lips of the fenders is needed.
Will trade guitars for roadsters, food, shelter, clothes, etc, etc.
- garth
- Roadster Enthusiast
- Posts: 919
- Joined: Sat Jan 15, 2005 1:00 am
- Location: Delta, BC
- Model: 2000
- Year: High Windshield-68-70
- Contact:
Re: 16X7 +11 PANASPORTS ON STOCK SUSPENSION
Roman,
I did shift the body 3/16" to put the centerline of the wheel on the centerline of well.
The rub is just slight and high up in the well, not the lip. I don't want to disturb my fender lines so I will probably re-arch the springs and if that doesn't cure the rub, coil overs will eliminate the roll. Overkill and hard on the ass though.
I did shift the body 3/16" to put the centerline of the wheel on the centerline of well.
The rub is just slight and high up in the well, not the lip. I don't want to disturb my fender lines so I will probably re-arch the springs and if that doesn't cure the rub, coil overs will eliminate the roll. Overkill and hard on the ass though.
Garth
_________
68' 2000
_________
68' 2000
-
- Roadster Fanatic
- Posts: 105
- Joined: Sun May 03, 2015 9:31 am
Re: 16X7 +11 PANASPORTS ON STOCK SUSPENSION
I picked up the 16x7 Panasports and just ordered some Dunlop Direzza DZ102 195/50/16 tires. Should have them here on Tuesday.
- Alvin
- Roadster Nut-Site Supporter
- Posts: 8381
- Joined: Tue Jan 23, 2007 7:01 pm
Re: 16X7 +11 PANASPORTS ON STOCK SUSPENSION
Sweet! I ran those same exact tires up front:SERE Nate wrote:I picked up the 16x7 Panasports and just ordered some Dunlop Direzza DZ102 195/50/16 tires. Should have them here on Tuesday.

Jason also ran that size at all 4 corners on his '68 SRL:

I think the 50-series sidewall looks awesome, but keep in mind that it's also relatively tall in overall diameter.
Alvin Gogineni
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
Instagram
YouTube
My SR20 Build Thread
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
YouTube
My SR20 Build Thread
- spriso
- Vendor
- Posts: 1629
- Joined: Wed Jun 04, 2003 9:20 am
- Location: Oregon
- Contact:
Re: 16X7 +11 PANASPORTS ON STOCK SUSPENSION
The wheels on Jason's roadster were also 16x7 Panasport wheels with a +11 offset...
Spriso Motorsports
http://www.spriso.com
Instagram https://instagram.com/spriso/
SR20 Powered Roadsters
Engine swap kits Available! See my website!
http://www.spriso.com
Instagram https://instagram.com/spriso/
SR20 Powered Roadsters
Engine swap kits Available! See my website!
-
- Roadster Fanatic
- Posts: 105
- Joined: Sun May 03, 2015 9:31 am
Re: 16X7 +11 PANASPORTS ON STOCK SUSPENSION
Should be getting them mounted and balanced today, and put on tomorrow!
-
- Roadster Fanatic
- Posts: 105
- Joined: Sun May 03, 2015 9:31 am
Re: 16X7 +11 PANASPORTS ON STOCK SUSPENSION
Before and after. I am loving these wheels!
You do not have the required permissions to view the files attached to this post.