NRG short steering wheel hub question

[aclever1]

Does any know if NRG SHORT HUB Steering Wheel Adaptor Datsun 240Z 260Z 280Z 510 620 C10 NRG Innovations Part # SRK-142H works on the roadster? I ordered one and was sent the wrong one the company said they will exchange it but they would have to order it since they didn't have it in stock and wanted me to confirm that it will fit. I know most people use the MOMO 3503 adapter for the Z cars so I would image that this would work as well but just want to see if anyone else is using one. thanks

[okiedatsun]

I had also been interested in these. Reading on some of the Z forums it seems that they all had issues with the splines being the later style (more splines?). Might double check my info though.

Ian

[RCMike]

I run one. As I recall it was a classic Dodge part number.. I went to their warehouse and found the one that worked..

[aclever1]

I run one. As I recall it was a classic Dodge part number.. I went to their warehouse and found the one that worked..

Did the one for the 240z not work and you remember what one it was that worked?

[Flyman666]

old Thread but no the NRG short hub does NOT work just tried

NRG Innovations SRK-142H Hub Adapter

[eye]

NRG Innovations SRK-142H Hub Adapter

I have that on my 69 and it fits fine. The only issue I had was the turn signal lever mount was hitting the brass ring on the rear of the NRG causing it to ground and blow the horn. 10 min with a file on the pivot mount and all was good. Not sure if the splines are different for different years.

[Flyman666]

Nice. I’m trying to put on the same wheel
I’m reading more and I think 67.5 is different

[damarble]

How about the cheaper hubs? I found a Flashpower for $48 and a Boss for $33, which seem to use the Momo pattern and are said to fit 510s, 280Z, etc.

[redroadster68]

Ruien makes an inexpensive hub for momo. Bought on amazon for $20. Get a deep one to clear the horn button from the steering nut.

F75C2F17-1248-4F0D-B319-4100A5260F9A.jpeg

62B444D3-7241-4CCA-94AE-A9EFB3DFF5E4.jpeg

Momo competition wheel

[redroadster68]

Quick note... above pic is a hub for a grant Adapter....

[mrwierdwrench]

Part #'s for any of these adapters?

[redroadster]

My hub was a spline off , it still works with the aluminum being soft