mk63 CALIPERS?

For the racers out there!

Moderators: notoptoy, S Allen, Solex68

Post Reply
User avatar
fj20spl311
Roadsteraholic
Posts: 5038
Joined: Mon Nov 28, 2005 3:54 pm
Location: San Diego, Ca

mk63 CALIPERS?

Post by fj20spl311 »

Image

Anybody ever run these?

I saw in an old posting on some site the FIXITMAN had a pair?
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
User avatar
Gregs672000
Roadster Fanatic-Site Supporter
Posts: 9428
Joined: Fri Aug 07, 2009 11:47 pm
Location: Tacoma, WA

Re: mk63 CALIPERS?

Post by Gregs672000 »

Very similar looking to the Toyota 4runner calipers I run. I use a vented disc though, and those appear to be for solid.
Greg Burrows
'67 2000 #588
Tacoma, WA
User avatar
fj20spl311
Roadsteraholic
Posts: 5038
Joined: Mon Nov 28, 2005 3:54 pm
Location: San Diego, Ca

Re: mk63 CALIPERS?

Post by fj20spl311 »

Yes,
they are very similar to the 4 runner caliper.
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
User avatar
RC240z
Roadsteraholic
Posts: 1005
Joined: Wed Feb 22, 2006 1:14 pm
Location: Sunny Oceanside CA
Contact:

Re: mk63 CALIPERS?

Post by RC240z »

They look like the FIA calipers I have seen
67.5 2000, SRL 311 000305 Solex
A race car since new!
Instagram #RC240Z #geoskyalert


check out my blog at www.rcnetworksracing.com
User avatar
fj20spl311
Roadsteraholic
Posts: 5038
Joined: Mon Nov 28, 2005 3:54 pm
Location: San Diego, Ca

Re: mk63 CALIPERS?

Post by fj20spl311 »

RC240z wrote:They look like the FIA calipers I have seen
Yes,

I heard you have/had a set for the vented brakes?
Phil
67.5 SRL311-00148 Blue (FJ cruiser VOODOO Blue)
67.5 SPL311 FJ20E teal SDS EFI
69 SRL311 SOLD
19 Raptor SCAB
dat2kman
Roadster Newby
Posts: 22
Joined: Fri Oct 28, 2011 7:11 am
Location: Brisbane Australia

Re: mk63 CALIPERS?

Post by dat2kman »

These were supplied via Competition parts in both non-vented caliper left and right, as well as vented caliper left and right.
I am running a set of venteds on a H190 rear end in a rally car ( said car has FJ24 engine fitted!)
Post Reply