rota kyusha 2 15x7 +10

[shant67]

These could be good wheel option, they come in different finishes. I dont like the fact that these wheels are not old school wheels but they might look good on a roadster. Definitely need to enlarge the center bore otherwise 15x7 +10 offset sounds perfect. The rear wheels could possibly use a spacer for better stance look. These wheels should retail for $150 to $200 each but i will look around to find them for less.

these guys sell them for $212 over priced but good pictures
http://www.rotawheels.com.au/wheels/kyusha" onclick="window.open(this.href);return false;

[shant67]

maybe this should be moved to the wheels and tire discussion !!!!

[RCMike]

This looks like Rota's version of the Work Meister wheel.. If you want to see the Work wheel on a Roadster, Check out "Woody" on this site, he just put a crazy wide set of these on his roadster..

[Alvin]

Blatant copy of the WORK CR-01:

Best part is the barrel bolts are fake!

[shant67]

This looks like Rota's version of the Work Meister wheel.. If you want to see the Work wheel on a Roadster, Check out "Woody" on this site, he just put a crazy wide set of these on his roadster..

Woody is a animal... his are the real deal custom made to fit his car. I've been searching for 15x7 +10 and these are one of the few wheels I came across.

[shant67]

This looks like Rota's version of the Work Meister wheel.. If you want to see the Work wheel on a Roadster, Check out "Woody" on this site, he just put a crazy wide set of these on his roadster..

Woody is a animal... his are the real deal custom made to fit his car. I've been searching for 15x7 +10 and these are one of the few wheels I came across.

are there any other styles 15x7 +10 that you guys know of other than the watanabe style ???

[shant67]

I think the spoon sports might of been the originals but I'm not too sure

[Alvin]

I think the spoon sports might of been the originals but I'm not too sure

Shant, those are Spoon SW388 wheels. Yes, Rota made a replica of them too and they are called "Slipstreams"

[Alvin]

maybe we can move this to the wheel section, under:
"wheels that Rota has copied, see below"

Hayashi Racing Sakura
Rays Gramlights 57c
SSR Type X
Advan RG2
Advan RGD
Mugen MF10
Mugen MF8
AVS Model 5
SSR Professor SP1
Work Meister S1R
Volk Racing CE28n
Spoon CR93
Enkei NT03+M
Volk Racing TE37
Volk Racing TE37V
Mugen RNR
GAB Sport
Super Advan Racing
Mugen M7
Work RSZ-R
Work CR-01
Work Meister M1R
SSR Reverse Mesh
Work XD9
Nismo LMGT4
OEM Honda DC2 Type R
RS Watanabe
Advan RG
Hayashi Street
Racing Hart CP-035
Volk Racing RE30
WedsSport TC105N
Work CRKai
Sprint Hart CPR
Work Equip 01
Spoon SW388/ Regamaster EVO

[shant67]

maybe we can move this to the wheel section, under:
"wheels that Rota has copied, see below"

Hayashi Racing Sakura
Rays Gramlights 57c
SSR Type X
Advan RG2
Advan RGD
Mugen MF10
Mugen MF8
AVS Model 5
SSR Professor SP1
Work Meister S1R
Volk Racing CE28n
Spoon CR93
Enkei NT03+M
Volk Racing TE37
Volk Racing TE37V
Mugen RNR
GAB Sport
Super Advan Racing
Mugen M7
Work RSZ-R
Work CR-01
Work Meister M1R
SSR Reverse Mesh
Work XD9
Nismo LMGT4
OEM Honda DC2 Type R
RS Watanabe
Advan RG
Hayashi Street
Racing Hart CP-035
Volk Racing RE30
WedsSport TC105N
Work CRKai
Sprint Hart CPR
Work Equip 01
Spoon SW388/ Regamaster EVO

How do they get away with that ?

[Rhänne]

I installed Drag DR20 in same size on mine. 15x7 Offset 10 with federal 595 RSR 205/50 R15. At the moment it looks perfect with 2° of camber and the 69/70 wide fender.

Drag DR20 are copies of WORK Equip 03

Another point:
Aluminum alloys will also aging. Magnesium alloys can brake after some dozen years. no matter which brand is printed on .. OZ WORK Rays or something else. Think on this point if you want to buy a set of "original oldschool JDM wheels" and drive it hard on the track.

My rims also have plastic bolts on their "2 or 3 piece rim" ^^

[shant67]

Sorry for using your car Alvin this is the only picture I could find from the side view. I kinda like the look !!!