14 x 6" alloys for my '65 SP310.

Nissanman · Post by **Nissanman** » Mon May 05, 2014 1:58 am

I recently found at a friends Wrecking Yard, some near new Globe alloy wheels for the Datsun pattern.
Here are some pics. of just the rim fitted to the SP310: -

Front RHS.

Rear RHS.

Rear RHS.

They are 14 x 6" with a Positive 27 offset.
They fit a lot better than the Watanabes I bought so I have purchased them.
Not bad for $250

fj20spl311 · Post by **fj20spl311** » Mon May 05, 2014 2:19 am

The inside lip is almost the same as my 15X7 +12.......113.6 mm from the mounting face
Yours should be 115.6 mm assuming 7" lip to lip measurement

Nissanman · Post by **Nissanman** » Mon May 05, 2014 3:23 am

CORRECT

Give that man a banana

My bench testing came up with a Back Space of 115mm even but who are we to quibble over 0.6mm

Alvin · Post by **Alvin** » Mon May 05, 2014 11:32 pm

Must. Run. OEM. Hubcaps

pebbles · Post by **pebbles** » Mon May 05, 2014 11:48 pm

Bringsa bitto ripper to the goss,,,,

Nissanman · Post by **Nissanman** » Tue May 06, 2014 12:32 am

Ah yes, well the alloys are for Sunday best!
I do have 4 original steelies and the OEM wheel trims.
Still at the chroming shop being done: low priority.

Datsun Roadster Forum-311s.org

14 x 6" alloys for my '65 SP310.

14 x 6" alloys for my '65 SP310.

Re: 14 x 6" alloys for my '65 SP310.

Re: 14 x 6" alloys for my '65 SP310.

Re: 14 x 6" alloys for my '65 SP310.

Re: 14 x 6" alloys for my '65 SP310.

Re: 14 x 6" alloys for my '65 SP310.