Greeting from Millbrae!
Moderators: notoptoy, S Allen, Solex68
- DatsunMax
- Roadster Nut
- Posts: 42
- Joined: Thu Aug 01, 2013 10:52 am
Greeting from Millbrae!
Hello 311s families,
My name is Max. I have a 1966 Roadster. I have her for about 7 years now. Just 3 years ago I decided to challenge myself and took everything apart. Now, I have no choice but to finished her. So far, the body is done in showroom condition. Frame is powder coated. Front axel is done. All the bushings, shocks and springs has been changed. Front and back brakes are done.
Now, I need to rebuild the engine. I am rebuilding this car along a good friend who is a retired mechanic and my son. However, he doesn't rebuild engine. So i need all the help the 311s families can give me on machinist that works on Datsun. Rebello is good, but will cost me. I just want stock for cruising.
Thank you.
Max
My name is Max. I have a 1966 Roadster. I have her for about 7 years now. Just 3 years ago I decided to challenge myself and took everything apart. Now, I have no choice but to finished her. So far, the body is done in showroom condition. Frame is powder coated. Front axel is done. All the bushings, shocks and springs has been changed. Front and back brakes are done.
Now, I need to rebuild the engine. I am rebuilding this car along a good friend who is a retired mechanic and my son. However, he doesn't rebuild engine. So i need all the help the 311s families can give me on machinist that works on Datsun. Rebello is good, but will cost me. I just want stock for cruising.
Thank you.
Max
DatsunMax, Out looking to restore my convertible.
1966 SPL311
Millbrae, California
1966 SPL311
Millbrae, California
- Nissanman
- Roadster Fanatic-Site Supporter
- Posts: 3452
- Joined: Mon Apr 16, 2007 8:07 pm
- Location: Adelaide, South Australia
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: Greeting from Millbrae!
Hi Max and welcome.
Please put your location in your signature or account details, that will help us to help you
Please put your location in your signature or account details, that will help us to help you

Nissanman, just trying to help.
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
- notoptoy
- Vendor-Site Supporter
- Posts: 9700
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: Greeting from Millbrae!
Welcome Max:
There is plenty of help and support out there in CA, someone will chime in for you. In the meantime, how about posting some pictures of your project?
We love pictures and would love to see every step of the process on your restoration, before - during - and after!
There is plenty of help and support out there in CA, someone will chime in for you. In the meantime, how about posting some pictures of your project?
We love pictures and would love to see every step of the process on your restoration, before - during - and after!
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
- Alvin
- Roadster Nut-Site Supporter
- Posts: 8381
- Joined: Tue Jan 23, 2007 7:01 pm
Re: Greeting from Millbrae!
Welcome! There are lots of fellow owners on the peninsula and I work just near SFO. What engine do you have?
Alvin Gogineni
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
Instagram
YouTube
My SR20 Build Thread
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
YouTube
My SR20 Build Thread
- bikermike
- Site Supporter
- Posts: 1763
- Joined: Wed Jul 06, 2011 4:06 pm
- Location: Denver Area, CO
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Greeting from Millbrae!
Welcome Max. Yes, let's see some pics.
Didn't you post a few weeks ago about the R16 rebuild?
http://www.311s.org/phpBB3/viewtopic.ph ... it=rebello
If those leads didn't work out for you, there is a shop that a hot rod friend would use for his projects. If I recall correctly his engines were usually small block Chevys, but perhaps they can do something for you or refer you to someone else.
Champion Engines
1020 Florence Way, Campbell, CA 95008
(408) 374-5107
I can't vouch for their work 1st hand, but Champion was his go-to engine shop.
Good luck.
Didn't you post a few weeks ago about the R16 rebuild?
http://www.311s.org/phpBB3/viewtopic.ph ... it=rebello
If those leads didn't work out for you, there is a shop that a hot rod friend would use for his projects. If I recall correctly his engines were usually small block Chevys, but perhaps they can do something for you or refer you to someone else.
Champion Engines
1020 Florence Way, Campbell, CA 95008
(408) 374-5107
I can't vouch for their work 1st hand, but Champion was his go-to engine shop.
Good luck.
-Mike
1967.5 SPL311
1972 240z / L28
2003 BMW 525i Touring
2014 Jeep KL
1967.5 SPL311
1972 240z / L28
2003 BMW 525i Touring
2014 Jeep KL
- Gregs672000
- Roadster Fanatic-Site Supporter
- Posts: 9428
- Joined: Fri Aug 07, 2009 11:47 pm
- Location: Tacoma, WA
Re: Greeting from Millbrae!
Rebuilding an engine is not that hard and is a rewarding experience. Consider doing it yourself, perhaps with some guidance from your mechanic friend.
Greg Burrows
'67 2000 #588
Tacoma, WA
'67 2000 #588
Tacoma, WA
- DatsunMax
- Roadster Nut
- Posts: 42
- Joined: Thu Aug 01, 2013 10:52 am
Re: Greeting from Millbrae!
Hey guys, I uploaded the picture of my Pre-Restored Roadster!
I'll compile a progression of the car's restoration later on!
I'll compile a progression of the car's restoration later on!
DatsunMax, Out looking to restore my convertible.
1966 SPL311
Millbrae, California
1966 SPL311
Millbrae, California
- Alvin
- Roadster Nut-Site Supporter
- Posts: 8381
- Joined: Tue Jan 23, 2007 7:01 pm
Re: Greeting from Millbrae!
We are very active and do fun runs/meets/car shows. Follow the Car Shows/Fun Runs section and we can get together! Make the Solvang Show in April a must-do!
Alvin Gogineni
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
Instagram
YouTube
My SR20 Build Thread
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
YouTube
My SR20 Build Thread
- notoptoy
- Vendor-Site Supporter
- Posts: 9700
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: Greeting from Millbrae!
Where? Or is it just your profile picture?DatsunMax wrote:Hey guys, I uploaded the picture of my Pre-Restored Roadster!
I'll compile a progression of the car's restoration later on!
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG