Removing shift lever on SR20 DET

denniswagnerusa · Post by **denniswagnerusa** » Sun Nov 17, 2013 5:47 pm

I need to remove the shift lever to install the SR motor in my car. The engine has already been on the frame so the mounts are all correct. How do you remove the shift lever so everything fits through the transmission tunnel?

Post by **spl310** » Sun Nov 17, 2013 9:34 pm

I guess a hack saw is out... LOL!!

Nissanman · Post by **Nissanman** » Sun Nov 17, 2013 11:16 pm

.......and so is an angle grinder

SR20 gear shift detail.jpg

I have the S13/14/15 Service Manuals as .pdf doc, if you want them

bobd · Post by **bobd** » Mon Nov 18, 2013 6:27 am

There is a large snap ring under the boot holding the shifter in place. The shifter will pull straight up after the snap ring is removed

denniswagnerusa · Post by **denniswagnerusa** » Mon Nov 18, 2013 6:21 pm

Thanks all. Nissanman, I am interested in a manual for an S13.

Nissanman · Post by **Nissanman** » Mon Nov 18, 2013 7:03 pm

I have uploaded the Factory .pdf Service Manuals to my MediaFire site: -
S13, S14 and S15 Silvia Service Manuals
http://www.mediafire.com/?52sxrychy59lz

They are in compressed format, the expanded files are over 50Mb each.

Let me know if you have any difficulties

Datsun Roadster Forum-311s.org

Removing shift lever on SR20 DET

Removing shift lever on SR20 DET

Re: Removing shift lever on SR20 DET

Re: Removing shift lever on SR20 DET

Re: Removing shift lever on SR20 DET

Re: Removing shift lever on SR20 DET

Re: Removing shift lever on SR20 DET