Weber jetting vendor recommendations?

[krismon]

Keith Williams has been helping me get my Weber DCOE's set up on my KA24DE swap (more like him doing, me watching & learning- Thanks Keith!).

I need to order some additional jetting and don't want to use the vendor I bought the carbs from (long story). Any recommendations? I called cbperformance (as recommended in other threads), but they didn't have the sizes we need.

Kris.

[spl310]

Harley shops sometimes have jets... What do you need?

[Gregs672000]

I've found several venders via eBay, so I might start there. I have had to source Dellorto parts overseas, and I'm pretty sure that eurocarb has weber stuff.

[spyder]

http://www.racetep.com/weber.html" onclick="window.open(this.href);return false;

[krismon]

I found someone (that had what I needed) to take my money. Will report later if it's a positive experience.

[JT68]

I'm doing the same thing, but it isn't in a roadster as of yet.. What manifold are you using? thx!

[krismon]

Went with eurocarbs, even with the international shipping, cost less than buying local or mail order from California. Arrived from UK exactly 1 week.

I found someone (that had what I needed) to take my money. Will report later if it's a positive experience.

[krismon]

Custom manifold. Pics here: http://311s.org/phpBB3/viewtopic.php?f= ... 30#p156623" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

I'm doing the same thing, but it isn't in a roadster as of yet.. What manifold are you using? thx!

[Gregs672000]

Went with eurocarbs, even with the international shipping, cost less than buying local or mail order from California. Arrived from UK exactly 1 week.

I found someone (that had what I needed) to take my money. Will report later if it's a positive experience.

Glad that worked well for you. He's been great for Dellorto parts and jetting suggestions.