Front Apron/ grill Support Removal

Linusrp · Post by **Linusrp** » Wed Aug 03, 2005 4:27 pm

Okay, I pulled the radiator, removed the front bumper and chrome grill. Pulled the overflow tank also. Then I removed all of the screws located on the front apron/ grill support on the front of the car. I still can't seem to pull the front apron out. Am I missing something? Are these pieces welded somewhere that I am missing? This is a 1968 1600 if that matters. Thanks for the help.

Post by **Datrock** » Wed Aug 03, 2005 7:35 pm

The front grille support and valance is welded in. It's welded to the inner fenders. Also bolts to the outer fenders. I've never removed one before but I bet you can drill out the spot welds to get it out.. Bill

Linusrp · Post by **Linusrp** » Wed Aug 03, 2005 8:00 pm

Thanks Bill.