need help getting the seats out

[Cherry Blossom]

im cleaning out my newly adopted 67.5 roadster. and i cant seem to find the location of the bolts to take out the seats. can anyone lead me in the right direction.
oh, and i searched but couldnt find anything.
also, is there a pdf file of a mechanics manual on the internet anywhere to help me on the many tasks ill have to face with this car.
thanks,
sean

[Conner]

Four bolts on each seat, if I recall. Bolted right to the sheet metal. You can remove the nuts from underneath the car and then lift the seats free. Climb under there--you'll see them.

[Cherry Blossom]

thanks for the quick response! now ill just have to figure out the best jacking points.

[Conner]

Jack the car up by the frame. There are level/straight areas in both the front and the back. Put your jackstands under the frame as well. Don't use those jack holes under the doors--you'll just end up deforming your car.

[sgriffin]

If memory serves they are 10/12 mm. The most difficult ones are those nearest the console because the rear one is not clearly reovable because of the drive shat on the drivers side. Good luck. Sam