Hi,
I have a question that may seem obvious but i have to ask as the place where i want to purchase my rims is giving me some hassles!
What takes the various loads to the wheel. The wheel studs or the centre portion of the hub. I understand that on certain cars the centre section of the rim is an interferance fit onto the hub so in those cases it would be the hub but i believe on the roadster that the studs take the load. Any comments would be appreciated.
Andy.
Wheel Loads.
Moderators: notoptoy, S Allen, Solex68
-
itsa68
- Roadsteraholic
- Posts: 832
- Joined: Sun Apr 18, 2004 11:24 am
- Location: Winnipeg, Manitoba,Canada
- Model: 1500/1600
- Year: High Windshield-68-70
On my mags both front and rear locate to the wheel studs.
When the original steel rims were installed , only the fronts located to to the hub.
If concerned, use a ring to make up the difference beween the hub and mag center.
Check this out http://www.tirerack.com/wheels/tech/tec ... ntpage=107
Ray B
When the original steel rims were installed , only the fronts located to to the hub.
If concerned, use a ring to make up the difference beween the hub and mag center.
Check this out http://www.tirerack.com/wheels/tech/tec ... ntpage=107
Ray B