16x7 Riken Mesh FAIL

[Alvin]

I tried fitting the Riken wheel/tires from the Box Flare car this weekend:

Riken 16x7 Zero offset (L) with 225/50/16 vs Panasport 16x7 +10 offset 205/45/16….Yikes!


front, no chance of clearing front fenders…too much tire!



Barely clears
rear:

[fj20spl311]

Those look to tall for 16 x 225/45 so I looked a littler closer....

Those are 16 x 225 / 50 ...still look more than 20 mm wider......

[Alvin]

Those look to tall for 16 x 225/45 so I looked a littler closer....

Those are 16 x 225 / 50 ...still look more than 20 mm wider......

thanks for catching that Phil, edited post. I think the RS-3s run a little wider than "normal" street tires

[eastmedia]

I could use those on my Z. I like

[Alvin]

I could use those on my Z. I like

Ron these were originally on an S30…they are the perfect size imho

[punkzdriver]

I could use those on my Z. I like

Ron these were originally on an S30…they are the perfect size imho

Alvin,
Someone local to me has a set 15x7 with 0 offset. Would you say these wouldnt work? Im still trying to find some jdm wheels, 15" to clear 300zx calipers, but not needing spacers or rubbing.

[Datsun.David]

16x7 0 offset Konig Rewinds with 225/50's rub like a bastard on my 74 260z... I need about 5 mm to get comfortable. Took my fat accountant for a ride and peeled off half my sidewall. Good thing my wife is skinny...

[shant67]

My 15x7 0+ offset enkie wheels also rub ....but a wooden baseball bat took care of the problem for now.