Hayashi Street copies (Rota)

[nismou20]

Can someone tell me if I'm thinking this thru correct? Rota makes Hayashi copies and I'm interested in the Street wheels, but they only come in +4 +25 offsets for 15x7. I was told to be safe I should stay at about +15. Should I get the +25 and get 10mm spacers to stay within the +15 range? Will I need new longer wheel lugs? Will this be my best choice? I know there are some wheel gurus out there. Please advise. Thanks,

[Garm]

Should I get the +25 and get 10mm spacers to stay within the +15 range? Will I need new longer wheel lugs?

Yes and yes. +4 MIGHT fit though, maybe someone who has that offset can chime in.

I change studs anytime I use more than a 5mm spacer.

[Alvin]

I would get the +25 and use spacers just to be safe
+4 on a 15x7 is dangerously close to a zero offset. The zero offset 15x7 wheels I've tried don't fit, at least on my roadster with 205/50/15 tires

[jamesw]

My work wheels were 15x7 +7 and would just barely rub on the back outside lip. My fenders weren't rolled.

HTH
James

[aclever1]

+12 to +15 is safe ,my wheels at a +7 didn't fit on one side of rear, the other had about 2 mm to spare. I rolled my fronts but rolling the rear won't give you any more clearance unless you pull them a bit also but be careful with pulling, old paint/bondo doesn't like to be pulled. You also have the option of buying spacer with the studs built into them, I'm running a set now and have been for almost 2 years with no issues.

[Alvin]

Tom, I have seen these on 510s and I wonder if they have front hubs as big as out roadsters…one thing to keep in mind!

[fj20spl311]

Tom, I have seen these on 510s and I wonder if they have front hubs as big as out roadsters…one thing to keep in mind!

510 hubs are smaller........

I would get the +25......
You might want/need as little as 5-7 mm spacer (1/4")....IIRC +18 work better on the back on many cars......

Yes...I would get longer studs......

I have 15x7 +12 and had to roll the rear for 205/50s

[Alvin]

Hi Tom,
did you get a set of these?

[etroxel]

Get the +25's and space them to taste. Make sure they can clear a 73mm hub.

[nismou20]

Still looking comparing. I like the Rota Hyperblack like Mike and also Shakotans ( hayashi street copies) Toss up can't make my mind up. Decisions Decisions

[Alvin]

get the Shakotans

[ACote]

I was just looking at these, It looks like the have 15x7 +15 now. I think they look great for a classic looking 15"
http://www.rotawheels.com/wheel.php?id=107" onclick="window.open(this.href);return false;

[ACote]

I might have spoken too soon. It might be impossible to find the +15s. I'm probably going to email a vendor and ask.

[Alvin]

Alex,
18racing currently has (8) sets of 15x7 +4 offset 73mm bore
get 'em!

[ACote]

Alex,
18racing currently has (8) sets of 15x7 +4 offset 73mm bore
get 'em!

I think +4 would look great in the rears (with a little fender pulling) But wouldn't they stick out a lot in the front? The deep dish would be worth fender adjustments.