New to Roadster but not to Datsun

[Roman]

and it's a little too cold to drive it.

someone drove to work in the 40-degree temp range this morning. With the heater core deleted. Builds character.

Sorry. Buy a scarf.

Oh gee! Drive a motorcycle year round on the east coast.......THAT builds character.

[gokiburix]

and it's a little too cold to drive it.

someone drove to work in the 40-degree temp range this morning. With the heater core deleted. Builds character.

Sorry. Buy a scarf.

Oh gee! Drive a motorcycle year round on the east coast.......THAT builds character.

...not if i don't have to!

[spl310]

A college buddy from Maine drove his bike year round. His only other choice was to walk.

[gokiburix]

woohoo~ the gauges and clock came in the mail yesterday. Will be working on the roadster this sat (hopefully friday too) to get the new(er) gauges in.

It's pretty easy to access, right?

[spl310]

Not completely. Drop the steering column to get the tach out. The clock can be loads of fun...

[Garm]

yeah, it's tedious. Tach has to come out to get the speedo out, at least that's the way I did it.
While you're at it, put some brighter LED's in them.

[gokiburix]

thanks for the heads up! Does anyone have pictures of doing this?
(i did find Garm's thread on tach removal http://311s.org/phpBB3/viewtopic.php?f= ... 2&start=15" onclick="window.open(this.href);return false;)

Garm..that was the plan. The old bulbs are crap...and I think the tach bulbs are out on my current ones, so I'm missing some bulbs anyway. I will be doing LED strips. I've done it in the 510 that I had. I will try my best to document for the roadster.

This is the result on my 510:

white LED


blue LED


there's a remote to change colors of the LED

[gokiburix]

yessss...found some pics:
http://www.mydatsunroadster.com/page/12/" onclick="window.open(this.href);return false;

(with dash removed, but it gives an idea what I'll be tackling)

[gokiburix]

Well...here's the result!

I only did the speedo and the tach. I didn't bother with the multi gauge (too hard to get to and I'm ok with stock lighting on it)



If you want me to do a writeup, I can! I took some pics along the way

[sleepyzzz]

that looks great nice job

[Garm]

mmm, tach goes to 8k... mmmmm...

[gokiburix]

who has a new VIN plate??

...this guy!

[fairladyproducts.com]

I have a new blank model ID plate.
Stan

[L320]

I have the stamps here. Two sets. But I am in Florida...

Are these stamps anything special? I was just wondering if you could use a set from Harbor Freight?

I see they have 3 sizes, not sure which would be best? They have 1/8, 1/4 & 3/8

http://www.harborfreight.com/catalogsea ... t?q=stamps" onclick="window.open(this.href);return false;

Dale - AZ

[spl310]

1/8 would work fine. Compare the stamps to the shapes of the numbers stamped in your ID tag - there are differences.