garage tool tricks and tips
Moderators: notoptoy, S Allen, Solex68
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3925
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: garage tool tricks and tips
needle scaler H/F $19.00. Not too powerful. But that made sense in this case. Layed it as parallel to the floor as I could. Blew through this in 10-15 minutes. Works well in the corners to remove the seam sealer too. I will try a spot in the rear wheelwells on the undercoat as well. Thanks Datsunz.
You do not have the required permissions to view the files attached to this post.
David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
- fixitman04
- Roadsteraholic
- Posts: 726
- Joined: Sat Nov 12, 2005 12:29 am
- Location: grand forks nd
Re: garage tool tricks and tips
baking soda is a natural rust inhibitor. when mixed with or used as blasting media it will slow surface rust from forming.
67.5 srl-311-00407 u20
desperately looking for a 67.5 body that is rust free... id settle for any low window tub
desperately looking for a 67.5 body that is rust free... id settle for any low window tub
- fixitman04
- Roadsteraholic
- Posts: 726
- Joined: Sat Nov 12, 2005 12:29 am
- Location: grand forks nd
Re: garage tool tricks and tips
lets bump this back up... too many good ideas here
anybody else have anything?
anybody else have anything?
67.5 srl-311-00407 u20
desperately looking for a 67.5 body that is rust free... id settle for any low window tub
desperately looking for a 67.5 body that is rust free... id settle for any low window tub
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3925
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: garage tool tricks and tips
technology. boy have I got some catching up to do. There is an Iphone app for a 3 axis angle finder.
However, the reviews were disheartening.
1,useless
2.horrible
3 glitchy
4 spazzy.
there is an alignment app as well. Caster/camber.
http://18000rpm.com/ialign_for_iphone_a ... align.html" onclick="window.open(this.href);return false;
Reviews were,
1.Not accurate
2.Not accurate.
my device does not contain the required gyro hardware.
shucks
The spirit of Stonehenge prevails.
However, the reviews were disheartening.
1,useless
2.horrible
3 glitchy
4 spazzy.
there is an alignment app as well. Caster/camber.
http://18000rpm.com/ialign_for_iphone_a ... align.html" onclick="window.open(this.href);return false;
Reviews were,
1.Not accurate
2.Not accurate.
my device does not contain the required gyro hardware.
shucks
The spirit of Stonehenge prevails.
David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
- Nissanman
- Roadster Fanatic-Site Supporter
- Posts: 3370
- Joined: Mon Apr 16, 2007 8:07 pm
- Location: Adelaide, South Australia
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: garage tool tricks and tips
New technology?
It put me out of a job BUT, I don't have any issues with that
I use it all the time.
I wonder how cars were restored before the advent of email, web sites and such
Must have been B... hard
Sent from my desktop clunker PC via a tellyphone line![Neutral :|](./images/smilies/icon_neutral.gif)
It put me out of a job BUT, I don't have any issues with that
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
I use it all the time.
I wonder how cars were restored before the advent of email, web sites and such
![Shocked :shock:](./images/smilies/icon_eek.gif)
Must have been B... hard
![Evil or Very Mad :evil:](./images/smilies/icon_evil.gif)
Sent from my desktop clunker PC via a tellyphone line
![Neutral :|](./images/smilies/icon_neutral.gif)
Nissanman, just trying to help.
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
1965 SP310 Engine No. G-93326 Car No. SP310-10817
https://photos.shutterfly.com/album/60141836519
On the road again!
- 68DSU
- Roadster Fanatic-Site Supporter
- Posts: 1000
- Joined: Thu Nov 03, 2011 10:02 am
- Location: Fair Oaks, Ca.
- Model: 1500/1600
- Year: High Windshield-68-70
Re: garage tool tricks and tips
There were a lot of mistakes, modifications, and guesswork that are now called "the sins of the PO".Nissanman wrote:New technology?
I wonder how cars were restored before the advent of email, web sites and such![]()
Must have been B... hard![]()
Rick
Constantly working on the Datsun whenever I get around to it.
1968 SPL 311
1987 Toyota MR2 T-top (don't hate, wife's car)
2014 Ford Mustang convertible
SPF 50
Constantly working on the Datsun whenever I get around to it.
1968 SPL 311
1987 Toyota MR2 T-top (don't hate, wife's car)
2014 Ford Mustang convertible
SPF 50
-
- Roadster Fanatic
- Posts: 148
- Joined: Sun Dec 19, 2004 8:08 pm
- Location: Vancouver,BC
Re: garage tool tricks and tips
for the American members...screw the Philips screws and get Robertson headed screws
for garage ideas and designs check out http://www.garagejournal.com/" onclick="window.open(this.href);return false;
for garage ideas and designs check out http://www.garagejournal.com/" onclick="window.open(this.href);return false;
- jake7140
- Roadster Fanatic
- Posts: 208
- Joined: Thu Sep 06, 2007 9:04 pm
- Location: SE Wisconsin
- Model: 1500/1600
- Year: Low Windshield-64-67.5
- Contact:
Re: garage tool tricks and tips
-a little grease on the inside end of water hoses; slips on easy, doesn't corrrode, slips off easy years later.
- egg cartons for nuts and bolts 12, 18 or 24 while in a project, or put back where they came from or just group piles (am I bad?)
- wide mouth square (packs nicer than round) plastic goodie jars for long tern storage of bigger/grouped stuff ie: sae grade 8 in one, etc
- various gasket material sheets to make your own with a utility shear (0.99 at H/F) and exacto
- the 7.00 H/F furniture dollies for engine dollies. fits perfect normal or standing on back
- anti seize is your friend
- +1 for the pick set, head light (LED), line on the jack, magnetic picker upper
- egg cartons for nuts and bolts 12, 18 or 24 while in a project, or put back where they came from or just group piles (am I bad?)
- wide mouth square (packs nicer than round) plastic goodie jars for long tern storage of bigger/grouped stuff ie: sae grade 8 in one, etc
- various gasket material sheets to make your own with a utility shear (0.99 at H/F) and exacto
- the 7.00 H/F furniture dollies for engine dollies. fits perfect normal or standing on back
- anti seize is your friend
- +1 for the pick set, head light (LED), line on the jack, magnetic picker upper
Steve
67.5 1600 racer
68 1600
70 SPL 2L 5spd in resto process
66 frame & shell
Shelves of parts
06 Infiniti M35
60 BMW R60/2
65 Harley Davidson Topper AH
67.5 1600 racer
68 1600
70 SPL 2L 5spd in resto process
66 frame & shell
Shelves of parts
06 Infiniti M35
60 BMW R60/2
65 Harley Davidson Topper AH
- dbrick
- Roadster Fanatic-Site Supporter
- Posts: 10084
- Joined: Thu Sep 09, 2004 11:05 pm
- Location: Kenilworth, New Jersey
Re: garage tool tricks and tips
Did I or someone else ever mention the split foam pipe insulation on the floorjack handle? A 3 foot piece covers well, 3/4 fits partway but grips the handle well . I don't stick the adhesive and use a piece about 2" outside diameter.
Not rocket science, but helps.
![Image](http://image.truckinweb.com/f/tech/1107tr_50_garage_tech_tips/30987557+w195/1107tr-13+50-garage-tech-tips+floor-jack-foam-handle-pad.jpg)
Not rocket science, but helps.
![Image](http://image.truckinweb.com/f/tech/1107tr_50_garage_tech_tips/30987557+w195/1107tr-13+50-garage-tech-tips+floor-jack-foam-handle-pad.jpg)
Dave Brisco
Take my advice, I'm not using it"
66 2000 The Bobster
64 1500 in pieces for sale
1980 Fiat X1/9
2009 Volvo C-70
08 Expedition EL, STUPID huge but comfy
1962 Thompson Sea Lancer, possible money pit
- mraitch
- Roadsteraholic
- Posts: 3629
- Joined: Mon Oct 02, 2006 7:03 pm
- Location: Lake Balboa (SFV) - CA
- Model: 1500/1600
- Year: High Windshield-68-70
- Contact:
All you ever didn't need to know about screws (including rob
https://en.wikipedia.org/wiki/List_of_screw_drives" onclick="window.open(this.href);return false;
Peter Harrison
1970 1600 (Stroker) - TOAD SAN (Eliza)
1970 1600 (Stock) - As Yet Unnamed
Lake Balboa (SFV) , California
1970 1600 (Stroker) - TOAD SAN (Eliza)
1970 1600 (Stock) - As Yet Unnamed
Lake Balboa (SFV) , California
- dbrick
- Roadster Fanatic-Site Supporter
- Posts: 10084
- Joined: Thu Sep 09, 2004 11:05 pm
- Location: Kenilworth, New Jersey
Re: All you ever didn't need to know about screws (including
Need to find myself some JIS drivers.mraitch wrote:https://en.wikipedia.org/wiki/List_of_screw_drives" onclick="window.open(this.href);return false;
Techtip..
1. Especially on Japanese cars and products, be sure to apply ALOT of push on the phillips/JIS head screws before and during turning. Their assembly procedure calls for pushing in very hard with a quick final turn to stretch the screw.
2. After you strip the Phillips head,
![Sad :(](./images/smilies/icon_sad.gif)
Dave Brisco
Take my advice, I'm not using it"
66 2000 The Bobster
64 1500 in pieces for sale
1980 Fiat X1/9
2009 Volvo C-70
08 Expedition EL, STUPID huge but comfy
1962 Thompson Sea Lancer, possible money pit
-
- Roadster Fanatic-Site Supporter
- Posts: 193
- Joined: Wed Mar 26, 2008 1:08 pm
- Location: Andover, Kansas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: garage tool tricks and tips
This is a great tip. I used a 1/4" drive, 1/4" socket and used a 1/4" hex wrench (Allen wrench). I put the socket on the hex wrench and the square drive hole on the adjuster. Worked like a dream!FergO2k wrote:brake adjuster studs (square) strip easily, and are 1/4" square.
so turn a 1/4" drive socket around, using the drive hole as the socket, no more stripping. You'll have to shop thru your set and find which one of the "socket" ends fits your wrench, it will be different based on whether you have 6 point or 12 point sockets. Stan taught me that one.
1966 SPL311 02870
- fixitman04
- Roadsteraholic
- Posts: 726
- Joined: Sat Nov 12, 2005 12:29 am
- Location: grand forks nd
Re: garage tool tricks and tips
8mm 6point fits a 1/4 square
67.5 srl-311-00407 u20
desperately looking for a 67.5 body that is rust free... id settle for any low window tub
desperately looking for a 67.5 body that is rust free... id settle for any low window tub
- Solex68
- Site Supporter
- Posts: 2093
- Joined: Fri May 25, 2012 3:30 pm
- Location: Laguna Hills, CA
- Model: 2000
- Year: High Windshield-68-70
- Contact:
Re: garage tool tricks and tips
Why does it seem we are so much smarter than the POs? LOL.68DSU wrote:There were a lot of mistakes, modifications, and guesswork that are now called "the sins of the PO".
If it weren't for those PO's we might be bored. Ha ha ha.
Greg
Greg a.k.a SOLEX68 - http://www.datsunvents.com/
Laguna Hills, CA
68 2000
Always willing to help another Datsun Roadster owner
Pending installs: All steering components, Stan Stealth Dizzy
Laguna Hills, CA
68 2000
Always willing to help another Datsun Roadster owner
Pending installs: All steering components, Stan Stealth Dizzy
-
- Roadster Fanatic-Site Supporter
- Posts: 193
- Joined: Wed Mar 26, 2008 1:08 pm
- Location: Andover, Kansas
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: garage tool tricks and tips
Mine are a bit rounded so I liked having more contact area.fixitman04 wrote:8mm 6point fits a 1/4 square
1966 SPL311 02870