Pat Mahoney's Bolt Packs

Post by **S Allen** » Thu Mar 31, 2005 10:57 am

Well, where better a place to put another plug in for Pat's frame bolt packs. Money well spent on a frame off restoration. You can contact Pat at dynaguy54@hotmail.com You can read about what you get on the main site or do a search of this forum.

Steve

JoeK · Post by **JoeK** » Thu Mar 31, 2005 11:40 pm

As I'm putting my '68 back together, I'm replacing all the nuts and bolts with stainless. In the process of all this, I seem to have lost the original fender bolts that bolt the bottom rear of the fender to the body. Does anybody know what size these are? I don't seem to have a bolt in my collection that will fit that particular hole.

Most everything else that bolts the body together, doors, fenders, hood and trunk are either 5/16x24 or 1/4x28, but neither size works, nor 6mm or 8mm.

Thanks much,

dynaguy · Post by **dynaguy** » Fri Apr 01, 2005 9:34 am

Joe, I ran a tap through the threads on that lower mount captured nut. That is a bad area for rust. A 5/16-24x3/4" worked for me. Hope this helps. Pat Mahoney '69 2000

dynaguy · Post by **dynaguy** » Tue Nov 15, 2005 9:46 am

For those that have inquired. My bolt packs are back in stock and available for immediate shipment. There has been a slight price increase due to the rising costs of steel worldwide. PM me for contents and pricing. Pat Mahoney '69 2000