Master Brake Cylinder Question
Moderators: notoptoy, S Allen, Solex68
- Chucks66
- Roadster Fanatic
- Posts: 216
- Joined: Mon Dec 20, 2010 2:43 pm
- Location: Las Vegas, Nevada
- Contact:
Master Brake Cylinder Question
Im playing with my old duel master brake cylinder and cant get the rear piston out? I removed the two hex screws and the front or closest to the fire wall is longer then the rear (see pic) is this normal?
I was thinking that part of the screw is broke off in the housing and thats why i cant get piston out.
Also i need to order a new master any ideas on where to go.
I was thinking that part of the screw is broke off in the housing and thats why i cant get piston out.
Also i need to order a new master any ideas on where to go.
You do not have the required permissions to view the files attached to this post.
Chuck Grohs
1967.5 SRL 311 #00148 Unholy Grail
1967 Nissan Patrol #L60 10218 Old Man
2014 Ford F250 Platinum 4 door 4x4
2009 Tahoe
1967.5 SRL 311 #00148 Unholy Grail
1967 Nissan Patrol #L60 10218 Old Man
2014 Ford F250 Platinum 4 door 4x4
2009 Tahoe
- Chucks66
- Roadster Fanatic
- Posts: 216
- Joined: Mon Dec 20, 2010 2:43 pm
- Location: Las Vegas, Nevada
- Contact:
Re: Master Brake Cylinder Question
Ive found out that the short screw is correct, but i still cant figure out how to get the piston out. It does move in and out a little when i push on it with a long screwdriver but will not slid out like the first piston did.
Has anyone done this before?
Has anyone done this before?
Chuck Grohs
1967.5 SRL 311 #00148 Unholy Grail
1967 Nissan Patrol #L60 10218 Old Man
2014 Ford F250 Platinum 4 door 4x4
2009 Tahoe
1967.5 SRL 311 #00148 Unholy Grail
1967 Nissan Patrol #L60 10218 Old Man
2014 Ford F250 Platinum 4 door 4x4
2009 Tahoe
-
- Roadster Fanatic
- Posts: 294
- Joined: Sun Jun 25, 2006 8:22 pm
- Location: Smithville ON Canada
Re: Master Brake Cylinder Question
Hit the open end on a bloke off wood to force the piston out, if nothing is still holding it in.
George
67 2000
69 2000
76 620 K/Cab
67 2000
69 2000
76 620 K/Cab
- Chucks66
- Roadster Fanatic
- Posts: 216
- Joined: Mon Dec 20, 2010 2:43 pm
- Location: Las Vegas, Nevada
- Contact:
Re: Master Brake Cylinder Question
I have tried that, it really feels like something is stoping it. when i push it in with the screwdriver and let the spring push it back out (about 1 inch) i hear and feel it stop on something.
Chuck Grohs
1967.5 SRL 311 #00148 Unholy Grail
1967 Nissan Patrol #L60 10218 Old Man
2014 Ford F250 Platinum 4 door 4x4
2009 Tahoe
1967.5 SRL 311 #00148 Unholy Grail
1967 Nissan Patrol #L60 10218 Old Man
2014 Ford F250 Platinum 4 door 4x4
2009 Tahoe
- Chucks66
- Roadster Fanatic
- Posts: 216
- Joined: Mon Dec 20, 2010 2:43 pm
- Location: Las Vegas, Nevada
- Contact:
Re: Master Brake Cylinder Question
Ok. After sawzalling an older duel master cylinder apart i have found that if the rear piston doesnt come out your screwed!!! its rusted in and will never come out.
Time to buy a new one
Time to buy a new one
Chuck Grohs
1967.5 SRL 311 #00148 Unholy Grail
1967 Nissan Patrol #L60 10218 Old Man
2014 Ford F250 Platinum 4 door 4x4
2009 Tahoe
1967.5 SRL 311 #00148 Unholy Grail
1967 Nissan Patrol #L60 10218 Old Man
2014 Ford F250 Platinum 4 door 4x4
2009 Tahoe
- K1200 GT
- Roadsteraholic
- Posts: 2135
- Joined: Wed Feb 04, 2009 12:15 pm
- Location: Grants Pass, Oregon
Re: Master Brake Cylinder Question
What happens when you take the 2 fittings out of the bottom? I assume you have the inside snap out of the back....some do.
Rich
Rich
Life is good...but I want more
If I cant fix it, It aint broke
Rich
2000 Miata Special Edition 6 spd/LSD
1970 SPL 311
1999 Dodge 3/4 4x4
1986 Toyota Cressida
2003 BMW K1200GT (1200 cc)
1992 BMW R100RT (1000cc)
1969 BMW R69S (600cc)
1997 BMW 328I
If I cant fix it, It aint broke
Rich
2000 Miata Special Edition 6 spd/LSD
1970 SPL 311
1999 Dodge 3/4 4x4
1986 Toyota Cressida
2003 BMW K1200GT (1200 cc)
1992 BMW R100RT (1000cc)
1969 BMW R69S (600cc)
1997 BMW 328I
- Chucks66
- Roadster Fanatic
- Posts: 216
- Joined: Mon Dec 20, 2010 2:43 pm
- Location: Las Vegas, Nevada
- Contact:
Re: Master Brake Cylinder Question
I got it out!!
With nothing to loose i soaked the inside with some fresh oil and started beating the H out of it, after about the hundreth smash on a piece of wood the piston slid out. To bad after all the work the cylinder is pitted...
With nothing to loose i soaked the inside with some fresh oil and started beating the H out of it, after about the hundreth smash on a piece of wood the piston slid out. To bad after all the work the cylinder is pitted...
Chuck Grohs
1967.5 SRL 311 #00148 Unholy Grail
1967 Nissan Patrol #L60 10218 Old Man
2014 Ford F250 Platinum 4 door 4x4
2009 Tahoe
1967.5 SRL 311 #00148 Unholy Grail
1967 Nissan Patrol #L60 10218 Old Man
2014 Ford F250 Platinum 4 door 4x4
2009 Tahoe
- spyder
- Roadster Fanatic-Site Supporter
- Posts: 2215
- Joined: Tue Apr 12, 2005 1:43 am
- Location: Live Oak, TX.
- Model: 2000
- Year: High Windshield-68-70
Re: Master Brake Cylinder Question
Pitted. Was that what held it in?
- FergO2k
- Roadster Fanatic-Site Supporter
- Posts: 1750
- Joined: Thu Apr 29, 2004 12:18 pm
- Location: SoCal
Re: Master Brake Cylinder Question
There are companies (someone will chime in.... Linda?) that will bore and stainless sleeve it for you, avoiding future pitting. Not outrageous prices either as I remember.
Fergus O
69 2L, SUs (driver, not susceptible to polish)
02 Tacoma 4 door (sold at 300k miles!)
2017 Honda Ridgeline (2021 purchase)
Los Alamitos, CA
69 2L, SUs (driver, not susceptible to polish)
02 Tacoma 4 door (sold at 300k miles!)
2017 Honda Ridgeline (2021 purchase)
Los Alamitos, CA
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Master Brake Cylinder Question
Chiming Yes, the company is Karp's Power Brake http://www.resleeve.com" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;. They can do masters, brakes, rear cylinders etc with a SS sleeve to eliminate rust. I used them for my stock brakes and was pleased with their service. There is a brake thread where I posted their work.
I think it is also a smart option for cars that don't get driven much, or that aren't maintained well enough.
Linda
I think it is also a smart option for cars that don't get driven much, or that aren't maintained well enough.
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.