New Guy in the Chicago area
Moderators: notoptoy, S Allen, Solex68
-
Starleaf
- Roadster Nut
- Posts: 28
- Joined: Tue Aug 18, 2009 6:01 pm
- Location: Chicago Suburbs
Re: New Guy in the Chicago area
Also removed the fuel tank to get boiled out and sealed.
You do not have the required permissions to view the files attached to this post.
-
Starleaf
- Roadster Nut
- Posts: 28
- Joined: Tue Aug 18, 2009 6:01 pm
- Location: Chicago Suburbs
Re: New Guy in the Chicago area
Lot's things I need to decide on before I take the block to get rebuilt.
I'm going to continue looking for a 2000 motor or a H20 motor until the snow begins to fall.
If I stay with the R16, I want to find a single weber DOCE set up (or equvilent) and a header.
Need to recurve the Distributor for no vacuum advance if I go this was.
Inspected the underside of the car and she is beautifully rust free!
couple of storage scratches and dings.
Felt good to get my hands dirty on the Roadster again!
Chris
I'm going to continue looking for a 2000 motor or a H20 motor until the snow begins to fall.
If I stay with the R16, I want to find a single weber DOCE set up (or equvilent) and a header.
Need to recurve the Distributor for no vacuum advance if I go this was.
Inspected the underside of the car and she is beautifully rust free!
couple of storage scratches and dings.
Felt good to get my hands dirty on the Roadster again!
Chris
You do not have the required permissions to view the files attached to this post.
-
notoptoy
- Vendor-Site Supporter
- Posts: 9700
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: New Guy in the Chicago area
You're moving right along! It's good to see the progress.
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG