skib's 1600 project
Moderators: notoptoy, S Allen, Solex68
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: A re-introduction
Skib,
You can edit your posts as well as edit the title of the thread via the edit button.
Linda
You can edit your posts as well as edit the title of the thread via the edit button.
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
- Skib
- Roadster Nut
- Posts: 52
- Joined: Fri Feb 05, 2010 11:19 pm
- Location: OR
- Contact:
Re: skib's 1600 project
anyone know what these loose wires are for?
everything functions fine but figure its good to know what they did go to before I clean up the harness.
these came from the behind the stereo area and ran under the carpet

this one comes out of the firewall and was just wrapped around some stuff

these are part of the main harness that runs along the driver side fender

as are these two

everything functions fine but figure its good to know what they did go to before I clean up the harness.
these came from the behind the stereo area and ran under the carpet

this one comes out of the firewall and was just wrapped around some stuff

these are part of the main harness that runs along the driver side fender

as are these two

1973 240zt - sold 
1983 280zx
1971 510 wagon - sold
1979 620 KC - sold
1970 1600 Roadster

1983 280zx
1971 510 wagon - sold

1979 620 KC - sold

1970 1600 Roadster
- shifty
- Roadster Enthusiast
- Posts: 1166
- Joined: Mon Dec 20, 2004 10:56 am
- Location: Portland, OR
- Contact:
Re: skib's 1600 project
I'm sure Mike can tell you.
The first one is likely for the cig lighter and light in console between seats.
The first one is likely for the cig lighter and light in console between seats.
Leigh Brooks
http://www.shiftco.com - my blog about cars (and stuff)
Latest post: http://www.shiftco.com/radios/the-test-mule/
67.5 SRL-00139 sleeping
67.5 SPL-11481 suspended animation
67.5 SPL-12961 snoring
67.5 SPL-13622 - H20 PWR!
http://www.shiftco.com - my blog about cars (and stuff)
Latest post: http://www.shiftco.com/radios/the-test-mule/
67.5 SRL-00139 sleeping
67.5 SPL-11481 suspended animation
67.5 SPL-12961 snoring
67.5 SPL-13622 - H20 PWR!
- Skib
- Roadster Nut
- Posts: 52
- Joined: Fri Feb 05, 2010 11:19 pm
- Location: OR
- Contact:
Re: skib's 1600 project
good to know, thanks shifty
Im sure some of it is from the old alt wiring but I just want ID what I can because some stuff will get totally removed and some of it Ill just wrap in the harness encase I need it later
Im sure some of it is from the old alt wiring but I just want ID what I can because some stuff will get totally removed and some of it Ill just wrap in the harness encase I need it later
1973 240zt - sold 
1983 280zx
1971 510 wagon - sold
1979 620 KC - sold
1970 1600 Roadster

1983 280zx
1971 510 wagon - sold

1979 620 KC - sold

1970 1600 Roadster
- notoptoy
- Vendor-Site Supporter
- Posts: 9700
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: skib's 1600 project
Nice fast progress Skib.
I moved your post to members rides as requested.
Tom
I moved your post to members rides as requested.
Tom
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
- Dcyco1
- Roadster Fanatic
- Posts: 245
- Joined: Thu Oct 15, 2009 1:02 pm
- Location: Batavia IL
Re: skib's 1600 project
The wires might be for the washer pump. The washer tank and pump reside near that location.
1969 Datsun 2000
1996 WS6 Trans Am
2016 Maxima SR
1996 WS6 Trans Am
2016 Maxima SR
- Skib
- Roadster Nut
- Posts: 52
- Joined: Fri Feb 05, 2010 11:19 pm
- Location: OR
- Contact:
Re: skib's 1600 project
notoptoy wrote:Nice fast progress Skib.
I moved your post to members rides as requested.
Tom
Thanks tom.
Iv got more done than Iv got pics posted since it got dark, should be out at the GF's today so Ill have some pics of the work I did last night.
just need to re foam the seat back and itl be lookin pretty good

I got the paint fixed up enough to look good at a few feet, its over all decent paint just has the few problem areas from old not so great prep work. so I just cleaned those spots up so they dont stand out and its decent looking untill it gets a proper repaint.
1973 240zt - sold 
1983 280zx
1971 510 wagon - sold
1979 620 KC - sold
1970 1600 Roadster

1983 280zx
1971 510 wagon - sold

1979 620 KC - sold

1970 1600 Roadster
- Skib
- Roadster Nut
- Posts: 52
- Joined: Fri Feb 05, 2010 11:19 pm
- Location: OR
- Contact:
Re: skib's 1600 project
got the messed up spots in the paint at least somewhat cleaned up.
good enough for a DD
before:

after:

before:

after:

before:

after:

there was a few more spots but you get the idea.
got work done in the interior as well
before:

after:


then Monk from Ratsun came over and gave it some stripes









good enough for a DD
before:

after:

before:

after:

before:

after:

there was a few more spots but you get the idea.
got work done in the interior as well
before:

after:


then Monk from Ratsun came over and gave it some stripes










1973 240zt - sold 
1983 280zx
1971 510 wagon - sold
1979 620 KC - sold
1970 1600 Roadster

1983 280zx
1971 510 wagon - sold

1979 620 KC - sold

1970 1600 Roadster
- duff me
- Roadster Fanatic-Site Supporter
- Posts: 421
- Joined: Fri May 29, 2009 7:37 pm
- Location: Northern Baltimore County Maryland
Re: skib's 1600 project
Lookin' good. Stripes are a nice touch.
1968 Datsun 1600 Roadster SPL31120785
- notoptoy
- Vendor-Site Supporter
- Posts: 9700
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: skib's 1600 project
I love what a little bit of cosmetics can do to totally transform a car. Nice quick touches, especially the interior and stripes.
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
- shifty
- Roadster Enthusiast
- Posts: 1166
- Joined: Mon Dec 20, 2004 10:56 am
- Location: Portland, OR
- Contact:
Re: skib's 1600 project
Skib do you need a center console?
Leigh Brooks
http://www.shiftco.com - my blog about cars (and stuff)
Latest post: http://www.shiftco.com/radios/the-test-mule/
67.5 SRL-00139 sleeping
67.5 SPL-11481 suspended animation
67.5 SPL-12961 snoring
67.5 SPL-13622 - H20 PWR!
http://www.shiftco.com - my blog about cars (and stuff)
Latest post: http://www.shiftco.com/radios/the-test-mule/
67.5 SRL-00139 sleeping
67.5 SPL-11481 suspended animation
67.5 SPL-12961 snoring
67.5 SPL-13622 - H20 PWR!
- Skib
- Roadster Nut
- Posts: 52
- Joined: Fri Feb 05, 2010 11:19 pm
- Location: OR
- Contact:
Re: skib's 1600 project
shifty wrote:Skib do you need a center console?
weve got one thats a bit banged up.
he GF dosent really want one tho.... Im think Im going to end up modding i to just make a finishing piece that goes from the radio plate to past the shifter or up to just past the ash tray area.
1973 240zt - sold 
1983 280zx
1971 510 wagon - sold
1979 620 KC - sold
1970 1600 Roadster

1983 280zx
1971 510 wagon - sold

1979 620 KC - sold

1970 1600 Roadster
- FergO2k
- Roadster Fanatic-Site Supporter
- Posts: 1773
- Joined: Thu Apr 29, 2004 12:18 pm
- Location: SoCal
Re: skib's 1600 project
something I just discovered, after running without a center console for 6+ years. (and being tall)
when in the twisties turning left, you brace yourself a lot more often than you think with your elbow on the center console lid. I am so tall that I have revised by console to have a 3" thick lid, might even put a Ipod storage facility within the lid itself.
Great pics of quickie paint dress-up, and ultra cool striping, I love it.
when in the twisties turning left, you brace yourself a lot more often than you think with your elbow on the center console lid. I am so tall that I have revised by console to have a 3" thick lid, might even put a Ipod storage facility within the lid itself.
Great pics of quickie paint dress-up, and ultra cool striping, I love it.
Fergus O
69 2L, SUs (driver, not susceptible to polish)
02 Tacoma 4 door (sold at 300k miles!)
2017 Honda Ridgeline (2021 purchase)
Los Alamitos, CA
69 2L, SUs (driver, not susceptible to polish)
02 Tacoma 4 door (sold at 300k miles!)
2017 Honda Ridgeline (2021 purchase)
Los Alamitos, CA
- Linda
- Fraternal Den Mother-RIP
- Posts: 7807
- Joined: Sat Nov 05, 2005 11:37 pm
- Location: Los Angeles
- Model: 1500/1600
- Year: High Windshield-68-70
Re: skib's 1600 project
I like the stripes. Did you use memory foam for the seats?
Linda
Linda
Sadly-Linda has passed away 2022. She was the 311's den mother and drove the first Rare-Parts ball joint project. RIP.
- Skib
- Roadster Nut
- Posts: 52
- Joined: Fri Feb 05, 2010 11:19 pm
- Location: OR
- Contact:
Re: skib's 1600 project
naw just regular foam. if you use all memory foam it sinks all the way to the seat frameLinda wrote:I like the stripes. Did you use memory foam for the seats?
Linda
so you so like a 70/30 split of regular and memory on top.
I didnt feel like finding some thinner sheets so I just did it all in regular foam and bulked it up with extra foam so its a bit more comfortable than the stock foam.
1973 240zt - sold 
1983 280zx
1971 510 wagon - sold
1979 620 KC - sold
1970 1600 Roadster

1983 280zx
1971 510 wagon - sold

1979 620 KC - sold

1970 1600 Roadster