Work EQUIP 01 and 03 Pictures!
Moderators: notoptoy, S Allen, Solex68
- Alvin
- Roadsteraholic
- Posts: 8284
- Joined: Tue Jan 23, 2007 7:01 pm
Work EQUIP 01 and 03 Pictures!
I was fortunate enough to test fit these wheels on my roadster with Eddie's (XEDDEX) help. We took LOTS of pics.
I was really impressed with the 01s look and fitment, I think it's the black spoke trim that makes it come together. The front wheels are perfect, very flush and just right imho. The rears have a deeper dish and it looks killer. I also like how the spokes frame the caliper:
Equip 01
(2) 15x6 +20mm
(2) 15x7 +7mm
Equip 03
(2) 15x7 +22mm (2" lip)
(2) 15x7.5 +4mm (3.25" lip)
We tried two of the fronts on this side as the rear wheel didn't have a tire mounted...it would take some fender rolling or flares to fit these on a stock roadster. The lip on the rears is absolutley GORGEOUS!
Contact Eddie if you are interested in buying these!
Last edited by Alvin on Sat Nov 22, 2014 2:28 pm, edited 1 time in total.
Alvin Gogineni
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
Instagram
YouTube
My SR20 Build Thread
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
YouTube
My SR20 Build Thread
- xeddex
- Roadster Fanatic
- Posts: 99
- Joined: Fri Nov 26, 2004 2:58 pm
- Location: Sunnyvale, CA
- Contact:
Re: Work EQUIP 01 and 03 Pictures!
After seeing them bolting up on Alvin's car, I'm almost having seller's remorse.
-Eddie
'66 Roadster
SAKE RKT
-Eddie
'66 Roadster
SAKE RKT
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3925
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: Work EQUIP 01 and 03 Pictures!
How do they look on your car?
David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
- aclever1
- Roadster Fanatic
- Posts: 171
- Joined: Thu May 12, 2011 1:11 pm
- Location: SLC Utah
Re: Work EQUIP 01 and 03 Pictures!
Wow they both look great! I'm surprised that a 15x7.5 +4 fits in the rear.
- dbrick
- Roadster Fanatic-Site Supporter
- Posts: 10084
- Joined: Thu Sep 09, 2004 11:05 pm
- Location: Kenilworth, New Jersey
Re: Work EQUIP 01 and 03 Pictures!
I vote for the 01's the bright polished against the black is perfect. They are SO much more unique than the Panasports, and just aggressive enough.
Bob had put stockers on the 66, sent a photo, I HAD to make him put the Shelbys back on, it changed the look too much.
Bob had put stockers on the 66, sent a photo, I HAD to make him put the Shelbys back on, it changed the look too much.
You do not have the required permissions to view the files attached to this post.
Dave Brisco
Take my advice, I'm not using it"
66 2000 The Bobster
64 1500 in pieces for sale
1980 Fiat X1/9
2009 Volvo C-70
08 Expedition EL, STUPID huge but comfy
1962 Thompson Sea Lancer, possible money pit
-
- Roadster Fanatic-Site Supporter
- Posts: 306
- Joined: Sat Jun 19, 2010 11:20 am
- Location: New York
- Contact:
Re: Work EQUIP 01 and 03 Pictures!
Love them.. Those are my next wheels... Alvin please emailme the specs on your brakes...
-
- Roadsteraholic
- Posts: 2754
- Joined: Thu Aug 05, 2010 11:06 am
- Location: Houston TX
Re: Work EQUIP 01 and 03 Pictures!
All right - it's finally time for an update. The wheels have surfaced on my '69 I bought these from Eddie thanks to the mouth watering photos Alvin posted (as well as the legwork making sure of fitment), and thanks to Virgil who bought my Panasports for his beautiful 240z
Here are the photos:
It took me a while to get the photos posted because it took a while to get everything sorted the way I like it. I needed to install longer studs on the front to accommodate the wheel spacers. I started w/ 8mm spacers, but ended up having to go to 10mm in order to get the center caps to fit. That gives me a 10mm offset up front which clears fine.
In the rear, I decided I needed to paint my brake drums black so that they "disappear" behind the wheels. What do you think? The wheels are only +7mm in the rear and the passengers side tire rubbed a bit at first (195's), but it was "on the way up" so I didn't worry about it too much. It's stopped now.
I'm tremendously happy with the wheels. I LOVE that huge polished lip on the rears.
Cheers
James
Here are the photos:
It took me a while to get the photos posted because it took a while to get everything sorted the way I like it. I needed to install longer studs on the front to accommodate the wheel spacers. I started w/ 8mm spacers, but ended up having to go to 10mm in order to get the center caps to fit. That gives me a 10mm offset up front which clears fine.
In the rear, I decided I needed to paint my brake drums black so that they "disappear" behind the wheels. What do you think? The wheels are only +7mm in the rear and the passengers side tire rubbed a bit at first (195's), but it was "on the way up" so I didn't worry about it too much. It's stopped now.
I'm tremendously happy with the wheels. I LOVE that huge polished lip on the rears.
Cheers
James
SRL311-00275
'96 Porsche 993 C4
2001 Excursion 7.3l
'96 Porsche 993 C4
2001 Excursion 7.3l
- notoptoy
- Vendor-Site Supporter
- Posts: 9677
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: Work EQUIP 01 and 03 Pictures!
Very Sweet!
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
- pebbles
- Roadster Fanatic-Site Supporter
- Posts: 3925
- Joined: Thu Dec 16, 2010 12:00 am
- Location: Washington
Re: Work EQUIP 01 and 03 Pictures!
Looking quite sorted now James!!
David
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
"When we were standing next to the motor while on the dyno, and the motor hit VVL, eyes went watery.."
-
- Roadsteraholic
- Posts: 2754
- Joined: Thu Aug 05, 2010 11:06 am
- Location: Houston TX
Re: Work EQUIP 01 and 03 Pictures!
Whoops, forgot to post this one:
Cheers
James
Cheers
James
SRL311-00275
'96 Porsche 993 C4
2001 Excursion 7.3l
'96 Porsche 993 C4
2001 Excursion 7.3l
- Alvin
- Roadsteraholic
- Posts: 8284
- Joined: Tue Jan 23, 2007 7:01 pm
Re: Work EQUIP 01 and 03 Pictures!
LOVE this picturejamesw wrote:
I'm tremendously happy with the wheels. I LOVE that huge polished lip on the rears.
Cheers
James
100% improvement over the rotas
great idea on the black drums
omg that lip
Alvin Gogineni
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
Instagram
YouTube
My SR20 Build Thread
San Jose, CA
1967.5 SPL/SR20
1997 Acura Integra GS-R
2022 Chevy Bolt EUV
zcarblog.com
YouTube
My SR20 Build Thread
- Gregs672000
- Roadster Fanatic-Site Supporter
- Posts: 8988
- Joined: Fri Aug 07, 2009 11:47 pm
- Location: Tacoma, WA
Re: Work EQUIP 01 and 03 Pictures!
Ya, I think I fell in love with those 01's. Hate to be a copy cat but what ya gonna do? I can imagine they are some $$. Saw that Maxxim made a knock off but I don't see them for sale anywhere and I suppose they are not the same quality. Someone want to pm me a price or dealer. Don't recall if alvin's guy had a contact number or website?
Greg Burrows
'67 2000 #588
Tacoma, WA
'67 2000 #588
Tacoma, WA
-
- Roadsteraholic
- Posts: 2754
- Joined: Thu Aug 05, 2010 11:06 am
- Location: Houston TX
Re: Work EQUIP 01 and 03 Pictures!
Hi Greg,
I checked out the cost to buy new wheels at one point and it was a lot! The dealer I checked with was upgrademotoring.com but I'm sure there are others.
There are Work 01 fakes now too but not in 4 x 114.3mm
Cheers
James
I checked out the cost to buy new wheels at one point and it was a lot! The dealer I checked with was upgrademotoring.com but I'm sure there are others.
There are Work 01 fakes now too but not in 4 x 114.3mm
Cheers
James
SRL311-00275
'96 Porsche 993 C4
2001 Excursion 7.3l
'96 Porsche 993 C4
2001 Excursion 7.3l
- Garm
- Roadster Enthusiast
- Posts: 2061
- Joined: Wed Dec 28, 2011 9:49 am
- Location: Canoga Park, CA
- Contact:
Re: Work EQUIP 01 and 03 Pictures!
uh, yeah... .like me. I can almost always beat his prices.I checked out the cost to buy new wheels at one point and it was a lot! The dealer I checked with was upgrademotoring.com but I'm sure there are others.
1969 Roadster 1600-ish #26244 "Spike"
---------------------------------
OS GIKEN LSD $1720
AASCO light flywheels $398.95
---------------------------------
OS GIKEN LSD $1720
AASCO light flywheels $398.95
-
- Roadsteraholic
- Posts: 2754
- Joined: Thu Aug 05, 2010 11:06 am
- Location: Houston TX
Re: Work EQUIP 01 and 03 Pictures!
Yeah - like Garm - and he has cool shirts too.
Cheers
James
Cheers
James
SRL311-00275
'96 Porsche 993 C4
2001 Excursion 7.3l
'96 Porsche 993 C4
2001 Excursion 7.3l