Hi,
I am need some advice on removing the ignition tumbler from my 1967 flat dash. I am dropping the dash off to get powder coated tomorrow and have everything removed but the tumbler.
Thanks i advance for the help.
Gabe
Help Needed Removing Ignition Tumbler
Moderators: notoptoy, S Allen, Solex68
-
gdawg
- Roadster Newby
- Posts: 9
- Joined: Mon Jun 20, 2016 7:40 pm
- Location: New England/Manila
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Help Needed Removing Ignition Tumbler
You do not have the required permissions to view the files attached to this post.
-
bmccarthy67
- Roadster Fanatic-Site Supporter
- Posts: 401
- Joined: Thu Feb 05, 2004 11:38 pm
- Location: Savannah, GA
Re: Help Needed Removing Ignition Tumbler
My "beauty" ring was just threaded on my 66. I'm not sure what you mean by removing the tumbler. The switch is a complete unit. Just unscrew (twist off) that trim ring and the switch unit can be pulled out the back. If you meant something else I apologize. (I think if you look at vendor photos you can see the threaded portion of the assembly).
v/r
Buddy
v/r
Buddy
http://www.mydatsun.com" onclick="window.open(this.href);return false;
67.5 SRL311-00321
67.5 SPL 2000 Transplant
66 SCCA Project
67.5 SRL311-00321
67.5 SPL 2000 Transplant
66 SCCA Project
-
gdawg
- Roadster Newby
- Posts: 9
- Joined: Mon Jun 20, 2016 7:40 pm
- Location: New England/Manila
- Model: 1500/1600
- Year: Low Windshield-64-67.5
Re: Help Needed Removing Ignition Tumbler
Hi Buddy,
That was it. Thanks so much for the help. It has been a crazy day for me. Now it is time for me to sleep
Best,
Gabe
That was it. Thanks so much for the help. It has been a crazy day for me. Now it is time for me to sleep
Best,
Gabe