I'm attempting to replace the weatherstripping on the exterior door handle - I've relieved the springs and it seems as if the hinge pins can be removed to separate the two parts enabling the new weatherstripping to attached without cutting the rubber. What's the magic trick to disassemble the handle?
Exterior Door Handle Disassembly
Moderators: notoptoy, S Allen, Solex68
-
- Roadster Newby
- Posts: 18
- Joined: Sun Jan 13, 2013 10:38 pm
- Location: Manassas, VA
Exterior Door Handle Disassembly
You do not have the required permissions to view the files attached to this post.
One Yellow SRL
- gnoplos
- Roadster Fanatic
- Posts: 110
- Joined: Mon Oct 08, 2018 7:51 am
- Location: Baltimore, MD
- Model: 1500/1600
- Year: High Windshield-68-70
Re: Exterior Door Handle Disassembly
I think you're gonna need to grind the rivets and re-rivet them.
1969 1600 jalopy on its way to a VQ35 V6 #24080
- dynaguy
- Roadster Fanatic-Site Supporter
- Posts: 1217
- Joined: Wed Jan 01, 2003 3:27 pm
- Location: Colton, Wa
Re: Exterior Door Handle Disassembly
I would razor blade slice the weatherstripping, then glue with super glue instead of messing with the integrity if the handle. There are o-ring making kits that use this process to make custom o-rings. Make sure you wipe any oil off the surface of the razor blade prior to making the cut. FWIW Pat