vacuum advance
Moderators: notoptoy, S Allen, Solex68
-
- Roadster Nut-Site Supporter
- Posts: 1731
- Joined: Fri Feb 13, 2015 8:08 pm
vacuum advance
I have been trying to rehab the vacuum advance on my 1967. I am talking about the plate assembly not the diaphragm part. It had gotten pretty badly rusted. Well, I cleaned it all out and put in the new bearings that Lorna sent me but it still operates very roughly and with a lot of resistance. So I went and got the one from my '68 parts car, and while the distributor looked very bad on the outside, the vacuum advance assembly worked much better. I am in the process of cleaning it up, and I intend to use it, but even though everything about it appears to be the same as the one from my '67, I want to be sure that they are the same. I know that the weights and springs in the centrifugal advance are different between the pre and post smog, but how about the vacuum?
located in Chester NH
1967 1600 in restoration
2013 Arctic Cat F-1100 turbo
Ford F-350 6.0
Ford 9000 puller, Ford 960 puller, Ford 901show, Ford 971 worker, Oliver 70 waiting its turn
1967 1600 in restoration
2013 Arctic Cat F-1100 turbo
Ford F-350 6.0
Ford 9000 puller, Ford 960 puller, Ford 901show, Ford 971 worker, Oliver 70 waiting its turn
- david premo
- Roadster Nut-Site Supporter
- Posts: 683
- Joined: Wed Jan 24, 2007 8:23 am
- Location: Southern Oregon
- Model: 2000
- Year: Low Windshield-64-67.5
- Contact:
Re: vacuum advance
The advance plates are the same.
- redroadster
- Roadsteraholic
- Posts: 2399
- Joined: Tue Mar 12, 2013 10:58 am
- Location: KCMO
- Model: 1500/1600
- Year: High Windshield-68-70
Re: vacuum advance
Napa used to have , new vac adv modules
Bet they still do
Bet they still do
Datsun dealer tech 76 to 87
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
Mitsubishi tech 9 yrs
Volvo, Kia, Toyota too
6 month - Rolls Royce
ASE MASTER TECH 96. - 11
70 SPL 86 Z31 T , Sportster
- notoptoy
- Vendor-Site Supporter
- Posts: 9677
- Joined: Fri Oct 02, 2009 2:55 pm
- Location: Winston-Salem, NC and Ocala, FL
- Contact:
Re: vacuum advance
The plates are all the same. If you can't get it to work smoothly, I can hook you up with a good used plate. PM me details if you need one.
"When all else fails, force prevails!" Ummm, we're gonna need a bigger hammer here.
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
67.5 SPL311 H20 w/5 speed
65 Impala Convertible
2017 C43 AMG
-
- Roadster Nut-Site Supporter
- Posts: 1731
- Joined: Fri Feb 13, 2015 8:08 pm
Re: vacuum advance
Thanks, guys
located in Chester NH
1967 1600 in restoration
2013 Arctic Cat F-1100 turbo
Ford F-350 6.0
Ford 9000 puller, Ford 960 puller, Ford 901show, Ford 971 worker, Oliver 70 waiting its turn
1967 1600 in restoration
2013 Arctic Cat F-1100 turbo
Ford F-350 6.0
Ford 9000 puller, Ford 960 puller, Ford 901show, Ford 971 worker, Oliver 70 waiting its turn